Технически документи
Спецификации
Brand
RS ProProduct Type
Float Switch
Mount Type
Vertical, External
Switch Output
NO/NC
Housing Material
Polypropylene
Cable Length
1m
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
100°C
Maximum AC Voltage
240V ac
Maximum DC Voltage
120V dc
Maximum Current
600mA
Gasket Material
Nitrile Rubber (NBR)
Standards/Approvals
No
Hazardous Area Certification
No
Series
RS PRO
Страна на произход
China
Детайли за продукта
The RS PRO external vertical mounting float switch is made up of polypropylene and gasket material of nitrile It has an output of NO/NC with a maximum switching voltage of 240VAC and switching current of 0.6A. The switch action may be reversed by removing the float, inverting it, then refitting to the stem. This float switch has 25VA switching capacity. Mounting is in the top or bottom of a tank through a compression seal, so does not require access to the inside of the tank for fitting a compact vertically mounted design with a single switch point.
Информацията за складовите наличности временно не е налична.
€ 21,18
€ 21,18 Всеки (ex VAT)
1
€ 21,18
€ 21,18 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
1
Технически документи
Спецификации
Brand
RS ProProduct Type
Float Switch
Mount Type
Vertical, External
Switch Output
NO/NC
Housing Material
Polypropylene
Cable Length
1m
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
100°C
Maximum AC Voltage
240V ac
Maximum DC Voltage
120V dc
Maximum Current
600mA
Gasket Material
Nitrile Rubber (NBR)
Standards/Approvals
No
Hazardous Area Certification
No
Series
RS PRO
Страна на произход
China
Детайли за продукта
The RS PRO external vertical mounting float switch is made up of polypropylene and gasket material of nitrile It has an output of NO/NC with a maximum switching voltage of 240VAC and switching current of 0.6A. The switch action may be reversed by removing the float, inverting it, then refitting to the stem. This float switch has 25VA switching capacity. Mounting is in the top or bottom of a tank through a compression seal, so does not require access to the inside of the tank for fitting a compact vertically mounted design with a single switch point.
