RS PRO Leaded Gunmetal Rod 2in Diameter, 13in L

Номер на артикул на RS: 181-9524Марка: RS PRO
brand-logo

Технически документи

Спецификации

Brand

RS Pro

Form

Rod

Material

Leaded Gunmetal

Length

13in

Rod Diameter

2in

Tensile Strength

241 Mpa

Hardness

65 HB

Thermal Conductivity

33.6Btu

Suitability

Bearings, Bushings, Gears, Piston Rings, Pumps

Density

0.322lb/in³

Страна на произход

United Kingdom

Детайли за продукта

Leaded Gunmetal, (Cast Lead Bronze)

A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of seizure under conditions of poor lubrication.
Supplied in 13in lengths

Conforms to SAE 660 (SAE 660 can also be used as an alternative to BS 1400 LB4)

Typical applications - bearings, bushes, washers and linings and for conditions with less than adequate lubrication. It may also be used in conjunction with softer shaft materials than would be recommended for the harder lead-free phosphor bronze.

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

€ 282,25

Всеки (ex VAT)

RS PRO Leaded Gunmetal Rod 2in Diameter, 13in L

€ 282,25

Всеки (ex VAT)

RS PRO Leaded Gunmetal Rod 2in Diameter, 13in L
Информацията за складовите наличности временно не е налична.

Купете в насипно състояние

количествоЕдинична цена
1 - 2€ 282,25
3 - 5€ 262,50
6 - 11€ 248,39
12+€ 225,81

Технически документи

Спецификации

Brand

RS Pro

Form

Rod

Material

Leaded Gunmetal

Length

13in

Rod Diameter

2in

Tensile Strength

241 Mpa

Hardness

65 HB

Thermal Conductivity

33.6Btu

Suitability

Bearings, Bushings, Gears, Piston Rings, Pumps

Density

0.322lb/in³

Страна на произход

United Kingdom

Детайли за продукта

Leaded Gunmetal, (Cast Lead Bronze)

A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of seizure under conditions of poor lubrication.
Supplied in 13in lengths

Conforms to SAE 660 (SAE 660 can also be used as an alternative to BS 1400 LB4)

Typical applications - bearings, bushes, washers and linings and for conditions with less than adequate lubrication. It may also be used in conjunction with softer shaft materials than would be recommended for the harder lead-free phosphor bronze.