RS PRO Constant Wattage Trace Heating Cable, 20W/m, 240V ac, -60 → +200 °C, 20m
Технически документи
Спецификации
Brand
RS ProCable Type
Constant Wattage
Output per Metre
20W
Self Regulating
No
Voltage Rating
240V ac
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+200°C
Operating Temperature Range
-60 → +200 °C
Length
20m
Sheath Material
Silicone Rubber
Hazardous Area Certification
ATEX
Standards Met
BS EN 60079-0:2009, BS EN 60079-30-1:2007
Страна на произход
United Kingdom
Детайли за продукта
RS PRO Trace Heating Cable - Constant Wattage
RS PRO is proud to offer a range of trace heating cables. These cables are of the highest quality and are designed to be cut from reel lengths and site terminated to suit pipe work. The constant wattage tape consists of several short heating zones, each connected across a pair of continuous bus-wire conductors. Each complete heating zone will give its full-rated design output with circuit voltage applied to the bus-wire conductors.
Features and Benefits
· Parallel circuit - constant watt for hazardous areas
· EX (certificate NO Sira 03ATEX3376U
· ATEX Approved Hazardous Area termination kit also available 665-7520
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 470,60
1 Reel of 20 Metres (ex VAT)
1
€ 470,60
1 Reel of 20 Metres (ex VAT)
1
Технически документи
Спецификации
Brand
RS ProCable Type
Constant Wattage
Output per Metre
20W
Self Regulating
No
Voltage Rating
240V ac
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+200°C
Operating Temperature Range
-60 → +200 °C
Length
20m
Sheath Material
Silicone Rubber
Hazardous Area Certification
ATEX
Standards Met
BS EN 60079-0:2009, BS EN 60079-30-1:2007
Страна на произход
United Kingdom
Детайли за продукта
RS PRO Trace Heating Cable - Constant Wattage
RS PRO is proud to offer a range of trace heating cables. These cables are of the highest quality and are designed to be cut from reel lengths and site terminated to suit pipe work. The constant wattage tape consists of several short heating zones, each connected across a pair of continuous bus-wire conductors. Each complete heating zone will give its full-rated design output with circuit voltage applied to the bus-wire conductors.
Features and Benefits
· Parallel circuit - constant watt for hazardous areas
· EX (certificate NO Sira 03ATEX3376U
· ATEX Approved Hazardous Area termination kit also available 665-7520