RS PRO 50 W Electronic LED Lighting Ballast, 220 → 240 V
Технически документи
Спецификации
Brand
RS ProWattage
50 W
Number of Lamps
1
Ballast Type
Electronic
Supported Lamp Type
LED
Voltage Rating
220 → 240 V
Dimmable
Yes
Length
124 mm
Width
79 mm
Height
22mm
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+50°C
Dimming Protocol
DALI
Страна на произход
Italy
Детайли за продукта
RS Dimmable Multipower LED Drivers
Direct current, dimmable, electronic drivers multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. This range of dimmable electronic drivers can power both voltage LED strips and power current LEDs. This power supply delivers high power, with active PFC and flexible selection of the output current.
Multi-power driver supplied with dip-switch for the selection of the output current
Active Power Factor Corrector
Protections against overheating, short circuits, mains voltage spikes and overloads
Can be switched on and off on secondary circuit for power LED
Approvals
EN 50172 (VDE 0108)
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
RS ProWattage
50 W
Number of Lamps
1
Ballast Type
Electronic
Supported Lamp Type
LED
Voltage Rating
220 → 240 V
Dimmable
Yes
Length
124 mm
Width
79 mm
Height
22mm
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+50°C
Dimming Protocol
DALI
Страна на произход
Italy
Детайли за продукта
RS Dimmable Multipower LED Drivers
Direct current, dimmable, electronic drivers multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. This range of dimmable electronic drivers can power both voltage LED strips and power current LEDs. This power supply delivers high power, with active PFC and flexible selection of the output current.
Multi-power driver supplied with dip-switch for the selection of the output current
Active Power Factor Corrector
Protections against overheating, short circuits, mains voltage spikes and overloads
Can be switched on and off on secondary circuit for power LED
Approvals
EN 50172 (VDE 0108)
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384