PR Electronics 5100 Series Galvanic Barrier, Current, RTD, Thermocouple, Voltage Input, Current, Voltage Output, 19.2
Технически документи
Спецификации
Brand
PR ElectronicsModule Type
Programmable Transmitter
Input Signal Type
Current, RTD, Thermocouple, Voltage
Output Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Hazardous Area Certification
ATEX
Operating Temperature Range
-20 → +60°C
Series
5100
Number of Channels
2
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Страна на произход
Denmark
Детайли за продукта
PR Electronics 5114B Ex Programmable Transmitter
PR Electronics 5114B intrinsically safe programmable transmitter for linearizing electronic temperature measurement. With a wide variety of jumper selectable inputs for current/voltage or temperature and conversion of linear resistance the 5114 transmitters are suitable for a wide range of temperature measurement applications.
The 5114B transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5114B signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.
Features and Benefits
• Input for RTD, TC, mV, linear resistance, mA and V
• Automatic 4- / 3-wire or programmable 2-wire cable compensation
• Active or passive current output and selectable voltage output
• Programmable current (0...100 mA) and voltage (0...250 VDC) inputs.
• Universal voltage supply
• 3.75 kVac galvanic isolation
• Configurable sensor error detection including NAMUR NE43
• Separation of circuits in PELV/SELV installations
• I.S. barrier for temperature sensors, potentiometers, and current / voltage signals
• I.S. barrier with I.S. power supply for 2-wire transmitters in zone 0, 1, 2, 20, 21 and 2
PR Electronics - Ex Interfaces
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 831,46
€ 831,46 Всеки (ex VAT)
1
€ 831,46
€ 831,46 Всеки (ex VAT)
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Технически документи
Спецификации
Brand
PR ElectronicsModule Type
Programmable Transmitter
Input Signal Type
Current, RTD, Thermocouple, Voltage
Output Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Hazardous Area Certification
ATEX
Operating Temperature Range
-20 → +60°C
Series
5100
Number of Channels
2
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Страна на произход
Denmark
Детайли за продукта
PR Electronics 5114B Ex Programmable Transmitter
PR Electronics 5114B intrinsically safe programmable transmitter for linearizing electronic temperature measurement. With a wide variety of jumper selectable inputs for current/voltage or temperature and conversion of linear resistance the 5114 transmitters are suitable for a wide range of temperature measurement applications.
The 5114B transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5114B signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.
Features and Benefits
• Input for RTD, TC, mV, linear resistance, mA and V
• Automatic 4- / 3-wire or programmable 2-wire cable compensation
• Active or passive current output and selectable voltage output
• Programmable current (0...100 mA) and voltage (0...250 VDC) inputs.
• Universal voltage supply
• 3.75 kVac galvanic isolation
• Configurable sensor error detection including NAMUR NE43
• Separation of circuits in PELV/SELV installations
• I.S. barrier for temperature sensors, potentiometers, and current / voltage signals
• I.S. barrier with I.S. power supply for 2-wire transmitters in zone 0, 1, 2, 20, 21 and 2
PR Electronics - Ex Interfaces
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products