P.M.A KS92 Panel PID Temperature Controller, 4 Output Relay 260V On-Off
Технически документи
Спецификации
Brand
P.M.AOutput Type
Relay
Product Type
PID Temperature Controller
Number of Outputs
4
Maximum Operating Temperature
60°C
Minimum Operating Temperature
0°C
Control Type
On-Off
Maximum Supply Voltage
260V
Auxiliary Power Supply
22 mA, 18 V
Digital Comms
PROFIBUS-DP Interface, RS422/RS485/Modbus RTU
Diagnostics
Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm
Maximum Voltage
250V
Display Type
LED, Multi Line
IP Rating
IP65, IP20, IP00
Standards/Approvals
EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)
Width
48mm
Length
118mm
Series
KS92
Mount Type
Panel
Input Type
Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input
Panel Depth
118mm
Страна на произход
United Kingdom
Детайли за продукта
PMA KS 92-1 Temperature Controller
The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.
• BluePort®
• Front interface and BlueControl software
• Maintenance manager and error list
• Two universal inputs
• Day & Night display shows plain text and bargraphs
• Manual gain scheduling
• Self-Tuning to the setpoint without oscillation
• Valve controller with position feedback and DAC monitoring
• 3-point controller for water, fan and oil cooling
• Type tested to EN 14597 (replaces DIN 3440) and cULus
• High-impedance mV input for O2 sensors
PMA Temperature Controllers
Информацията за складовите наличности временно не е налична.
€ 846,39
€ 846,39 Всеки (ex VAT)
1
€ 846,39
€ 846,39 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
1
Технически документи
Спецификации
Brand
P.M.AOutput Type
Relay
Product Type
PID Temperature Controller
Number of Outputs
4
Maximum Operating Temperature
60°C
Minimum Operating Temperature
0°C
Control Type
On-Off
Maximum Supply Voltage
260V
Auxiliary Power Supply
22 mA, 18 V
Digital Comms
PROFIBUS-DP Interface, RS422/RS485/Modbus RTU
Diagnostics
Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm
Maximum Voltage
250V
Display Type
LED, Multi Line
IP Rating
IP65, IP20, IP00
Standards/Approvals
EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)
Width
48mm
Length
118mm
Series
KS92
Mount Type
Panel
Input Type
Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input
Panel Depth
118mm
Страна на произход
United Kingdom
Детайли за продукта
PMA KS 92-1 Temperature Controller
The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.
• BluePort®
• Front interface and BlueControl software
• Maintenance manager and error list
• Two universal inputs
• Day & Night display shows plain text and bargraphs
• Manual gain scheduling
• Self-Tuning to the setpoint without oscillation
• Valve controller with position feedback and DAC monitoring
• 3-point controller for water, fan and oil cooling
• Type tested to EN 14597 (replaces DIN 3440) and cULus
• High-impedance mV input for O2 sensors