Pilz Transponder Non-Contact Safety Switch, 24V dc, Plastic Housing, M12
Технически документи
Спецификации
Brand
PilzSupply Voltage
24V dc
Housing Material
Plastic
Connection Type
M12
Actuator Type
Coded
Safety Category
4
Sensor Principle
Transponder
Actuator Included
Yes
Range
PSENcode
IP Rating
IP66, IP67
Depth
13mm
Width
26.4mm
Length
97.6mm
Страна на произход
Switzerland
Детайли за продукта
PSENcode Slim Non-Contact Safety Switch, Coded
The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
Features and Benefits
Transponder technology for presence detection
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
Safety Device Diagnostics (SDD)
Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
Signal output/diagnostic output Y32 for Safety Device Diagnostics
LED display for state of actuator detection, state of the inputs and supply voltage/fault
IP66 / IP67 protection
PSEN cs5.11 (stock no. 918-6667)
1 actuation direction with 3 approach directions: square marking for normal operating distance
M12 8 pole male connector
30 N holding force
PSEN cs5.1p (stock no. 918-6661)
4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance
M8 8 pole male connector
Supplied with
Actuator.
Approvals
CE, TÜV, UL/cUL, FCC, IC, ECOLAB.
Standards
EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 102,71
Всеки (ex VAT)
1
€ 102,71
Всеки (ex VAT)
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Технически документи
Спецификации
Brand
PilzSupply Voltage
24V dc
Housing Material
Plastic
Connection Type
M12
Actuator Type
Coded
Safety Category
4
Sensor Principle
Transponder
Actuator Included
Yes
Range
PSENcode
IP Rating
IP66, IP67
Depth
13mm
Width
26.4mm
Length
97.6mm
Страна на произход
Switzerland
Детайли за продукта
PSENcode Slim Non-Contact Safety Switch, Coded
The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
Features and Benefits
Transponder technology for presence detection
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
Safety Device Diagnostics (SDD)
Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
Signal output/diagnostic output Y32 for Safety Device Diagnostics
LED display for state of actuator detection, state of the inputs and supply voltage/fault
IP66 / IP67 protection
PSEN cs5.11 (stock no. 918-6667)
1 actuation direction with 3 approach directions: square marking for normal operating distance
M12 8 pole male connector
30 N holding force
PSEN cs5.1p (stock no. 918-6661)
4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance
M8 8 pole male connector
Supplied with
Actuator.
Approvals
CE, TÜV, UL/cUL, FCC, IC, ECOLAB.
Standards
EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products