Phoenix Contact 3212147 PT 16 N-PE Series Green/Yellow, Single-Level, Push In Termination

Технически документи
Спецификации
Brand
Phoenix ContactColour
Green/Yellow
Number of Levels
Single
American Wire Gauge
20 → 4AWG
Series
PT 16 N-PE
Termination Method
Push In
Voltage Rating
250 V
Current Rating
90A
Minimum Operating Temperature
-40 °C, -60 °C
Maximum Operating Temperature
+85 °C, +110 °C
Standards Met
IEC 60947-7-2
Model Number
PT 16 N-PE
Страна на произход
Poland
Детайли за продукта
PT 16 N Feed Through Terminal Blocks with Push-in Terminals
Feed through terminal blocks
Push-in connection
Conductor cross section: 0.5 mm² to 25 mm² (AWG 20 - 4)
Width: 12.2 mm
Mounting type: NS 35/7,5, NS 35/15
Colours: grey (785-8235); blue (785-8244); green/yellow (785-8247)
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
€ 36,39
€ 7,278 Each (In a Pack of 5) (ex VAT)
5
€ 36,39
€ 7,278 Each (In a Pack of 5) (ex VAT)
5
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
Технически документи
Спецификации
Brand
Phoenix ContactColour
Green/Yellow
Number of Levels
Single
American Wire Gauge
20 → 4AWG
Series
PT 16 N-PE
Termination Method
Push In
Voltage Rating
250 V
Current Rating
90A
Minimum Operating Temperature
-40 °C, -60 °C
Maximum Operating Temperature
+85 °C, +110 °C
Standards Met
IEC 60947-7-2
Model Number
PT 16 N-PE
Страна на произход
Poland
Детайли за продукта
PT 16 N Feed Through Terminal Blocks with Push-in Terminals
Feed through terminal blocks
Push-in connection
Conductor cross section: 0.5 mm² to 25 mm² (AWG 20 - 4)
Width: 12.2 mm
Mounting type: NS 35/7,5, NS 35/15
Colours: grey (785-8235); blue (785-8244); green/yellow (785-8247)
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.