Phoenix Contact 4-Way PTS 2.5-QUATTRO-PE Earth Terminal Block, 4mm², 26 → 12 AWG Wire, Push In, Polyamide
Технически документи
Спецификации
Brand
Phoenix ContactEarth Block Type
PTS 2.5-QUATTRO-PE
Wire Size
26 → 12 AWG
Cable CSA
4mm²
Colour
Green/Yellow
Number Of Ways
4
Termination Method
Push In
Housing Material
Polyamide
Length
49mm
Width
5.2mm
Height
50.5mm
Maximum Operating Temperature
+130°C
Hazardous Area Certification
ATEX, IECEx
Minimum Operating Temperature
-60°C
Страна на произход
Poland
Детайли за продукта
PTS 2.5 Ground Terminal Blocks
Angled conductor entry
Large space saving when used in concealed wiring systems
Equipped with four bridge shafts to offer a wide range of potential bridging options
Contact is made free from mechanical and electrical errors by simply snapping onto the DIN rail
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 6,039
Each (In a Pack of 5) (ex VAT)
5
€ 6,039
Each (In a Pack of 5) (ex VAT)
5
Технически документи
Спецификации
Brand
Phoenix ContactEarth Block Type
PTS 2.5-QUATTRO-PE
Wire Size
26 → 12 AWG
Cable CSA
4mm²
Colour
Green/Yellow
Number Of Ways
4
Termination Method
Push In
Housing Material
Polyamide
Length
49mm
Width
5.2mm
Height
50.5mm
Maximum Operating Temperature
+130°C
Hazardous Area Certification
ATEX, IECEx
Minimum Operating Temperature
-60°C
Страна на произход
Poland
Детайли за продукта
PTS 2.5 Ground Terminal Blocks
Angled conductor entry
Large space saving when used in concealed wiring systems
Equipped with four bridge shafts to offer a wide range of potential bridging options
Contact is made free from mechanical and electrical errors by simply snapping onto the DIN rail
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.