Технически документи
Спецификации
Brand
Phoenix ContactNumber of Channels
1
Module Type
Temperature Converter
Barrier Type
Galvanic Barrier
Output Signal Type
Relay
Maximum Voltage
125 V dc, 253V ac
Hazardous Area Certification
ATEX
Input Signal Type
RTD, Potentiometer, Thermocouple, Voltage
Supply Voltage
24 → 230V ac/dc
Maximum Current
7.4mA
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Safety Current Maximum
7.4mA
Safety Voltage Maximum
125 V dc, 253 V ac
Series
MACX MCR-EX-T
Operating Temperature Range
-20 → +65°C
Страна на произход
Germany
Детайли за продукта
MACX MCR-EX-T Series Signal Conditioners
Programmable Ex-i temperature transducer with analog output and 1 limit value relay
Standard configuration
Resistance thermometer in two, three, or four wire technology
Galvanic isolation
Wide range power supply
Spring cage connection
Warning
For a safe series connection the use of the normally open contacts at the termination points 2.5 and 2.6, as well as 3.5 and 3.6 is necessary.
For a safe parallel connection the use of the normally closed contacts of both relays at the termination points 2.4 and 2.5 respectively 3.4 and 3.5 is mandatory
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 517,39
Всеки (ex VAT)
1
€ 517,39
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
Phoenix ContactNumber of Channels
1
Module Type
Temperature Converter
Barrier Type
Galvanic Barrier
Output Signal Type
Relay
Maximum Voltage
125 V dc, 253V ac
Hazardous Area Certification
ATEX
Input Signal Type
RTD, Potentiometer, Thermocouple, Voltage
Supply Voltage
24 → 230V ac/dc
Maximum Current
7.4mA
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Safety Current Maximum
7.4mA
Safety Voltage Maximum
125 V dc, 253 V ac
Series
MACX MCR-EX-T
Operating Temperature Range
-20 → +65°C
Страна на произход
Germany
Детайли за продукта
MACX MCR-EX-T Series Signal Conditioners
Programmable Ex-i temperature transducer with analog output and 1 limit value relay
Standard configuration
Resistance thermometer in two, three, or four wire technology
Galvanic isolation
Wide range power supply
Spring cage connection
Warning
For a safe series connection the use of the normally open contacts at the termination points 2.5 and 2.6, as well as 3.5 and 3.6 is necessary.
For a safe parallel connection the use of the normally closed contacts of both relays at the termination points 2.4 and 2.5 respectively 3.4 and 3.5 is mandatory