Pepperl + Fuchs Glass Fibre Optic Sensor 300 mm, Push Pull Output, IP67, 10 → 30 V dc

Номер на артикул на RS: 510-3520Марка: Pepperl + Fuchs№ по каталога на производителя: VL18LL-M/40A/118/128
brand-logo

Технически документи

Спецификации

Detection Range

300 mm

Output Type

Push Pull

Fibre Optic Type

Glass

Response Time

1 ms

Light Source

Red LED

Electrical Connection

M12 4-Pin

Switching Frequency

500 Hz

IP Rating

IP67

Housing Material

Nickel Plated Brass

Supply Voltage

10 → 30 V dc

Length

78mm

Width

11.2mm

Minimum Operating Temperature

-25°C

Dimensions

78 x 11.2 x 7.8 mm

Depth

7.8mm

Maximum Operating Temperature

+70°C

Страна на произход

Germany

Детайли за продукта

M18 Fibre Amplifier

Pepperl & Fuchs VL18LL series fibre optic sensors offer many advantages, in particular for picking up small parts or in positions difficult to access. Suitable for use in rough environmental conditions, such as high temperatures or explosive conditions.
Depending on the fibre optic connected, the optical properties correspond to a single-path light barrier or a reflection light barrier. Single-path systems have one fibre optic each for transmitter and receiver. For reflection systems, the light is guided in a single fibre optic through separate transmitter and receiver fibres.

Light/dark switch as potentiometer
Clearly arranged control panel
Protection class 2
Not sensitive to ambient light, even with switched energy saving lamps
Multiple device installation possible, no mutual interference
Flashing power on LED in case of short-circuit
M12 connector 4 pin

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

€ 77,70

Всеки (ex VAT)

Pepperl + Fuchs Glass Fibre Optic Sensor 300 mm, Push Pull Output, IP67, 10 → 30 V dc

€ 77,70

Всеки (ex VAT)

Pepperl + Fuchs Glass Fibre Optic Sensor 300 mm, Push Pull Output, IP67, 10 → 30 V dc
Информацията за складовите наличности временно не е налична.

Технически документи

Спецификации

Detection Range

300 mm

Output Type

Push Pull

Fibre Optic Type

Glass

Response Time

1 ms

Light Source

Red LED

Electrical Connection

M12 4-Pin

Switching Frequency

500 Hz

IP Rating

IP67

Housing Material

Nickel Plated Brass

Supply Voltage

10 → 30 V dc

Length

78mm

Width

11.2mm

Minimum Operating Temperature

-25°C

Dimensions

78 x 11.2 x 7.8 mm

Depth

7.8mm

Maximum Operating Temperature

+70°C

Страна на произход

Germany

Детайли за продукта

M18 Fibre Amplifier

Pepperl & Fuchs VL18LL series fibre optic sensors offer many advantages, in particular for picking up small parts or in positions difficult to access. Suitable for use in rough environmental conditions, such as high temperatures or explosive conditions.
Depending on the fibre optic connected, the optical properties correspond to a single-path light barrier or a reflection light barrier. Single-path systems have one fibre optic each for transmitter and receiver. For reflection systems, the light is guided in a single fibre optic through separate transmitter and receiver fibres.

Light/dark switch as potentiometer
Clearly arranged control panel
Protection class 2
Not sensitive to ambient light, even with switched energy saving lamps
Multiple device installation possible, no mutual interference
Flashing power on LED in case of short-circuit
M12 connector 4 pin