Panasonic PAN1455-SPP Bluetooth Chip 2
Технически документи
Спецификации
Brand
PanasonicBluetooth Class
Class 1
Bluetooth Version
2
Maximum Output Power
4dBm
Receiver Sensitivity
-86dBm
Supported Bus Interfaces
ADC, SPI, UART
Dimensions
13.5 x 18.75 x 2.7mm
Height
2.7mm
Length
13.5mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
18.75mm
Страна на произход
China
Детайли за продукта
Modem Modules 3.0
Bluetooth system solutions enabling integrated Bluetooth connection for your product. These modules utilise the simple AT command set for ease of design via the UART or USB peripheral interface.
General
Supported Profiles: RFCOMM, SPP device A and B
Complete Bluetooth 3.0 + EDR solution
Ultra low power design
No external components except antenna where not included required
On-module voltage regulator. External supply 3.0-3.6V
Reference clock included
Low power clock from internal oscillator or external low power clock
High sensitivity design (-86 dBm typ.)
Interfaces
3.25 MBaud UART, USB, I2C and SPI Interface
18 GPIO’s for individual usage for your embedded software
3 Channel ADC and 1 Channel DAC
Cortex-M3 ST32F103 core for embedded profiles or application software
JTAG for boundary scan and debug
Bluetooth - Panasonic
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
PanasonicBluetooth Class
Class 1
Bluetooth Version
2
Maximum Output Power
4dBm
Receiver Sensitivity
-86dBm
Supported Bus Interfaces
ADC, SPI, UART
Dimensions
13.5 x 18.75 x 2.7mm
Height
2.7mm
Length
13.5mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
18.75mm
Страна на произход
China
Детайли за продукта
Modem Modules 3.0
Bluetooth system solutions enabling integrated Bluetooth connection for your product. These modules utilise the simple AT command set for ease of design via the UART or USB peripheral interface.
General
Supported Profiles: RFCOMM, SPP device A and B
Complete Bluetooth 3.0 + EDR solution
Ultra low power design
No external components except antenna where not included required
On-module voltage regulator. External supply 3.0-3.6V
Reference clock included
Low power clock from internal oscillator or external low power clock
High sensitivity design (-86 dBm typ.)
Interfaces
3.25 MBaud UART, USB, I2C and SPI Interface
18 GPIO’s for individual usage for your embedded software
3 Channel ADC and 1 Channel DAC
Cortex-M3 ST32F103 core for embedded profiles or application software
JTAG for boundary scan and debug