MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

Номер на артикул на RS: 136-0780Марка: MikroElektronika№ по каталога на производителя: MIKROE-2040
brand-logo

Технически документи

Спецификации

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Детайли за продукта

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards

€ 8,69

€ 8,69 Всеки (ex VAT)

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

€ 8,69

€ 8,69 Всеки (ex VAT)

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

Информацията за складовите наличности временно не е налична.

Информацията за складовите наличности временно не е налична.

количествоЕдинична цена
1 - 4€ 8,69
5 - 9€ 8,26
10+€ 7,82

Технически документи

Спецификации

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Детайли за продукта

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards