Microchip Amplified Zigbit Xplained Pro AT86RF233, SE2431L 802.15.4 Development Kit 2.4GHz ATZB-A-233-XPRO
Технически документи
Спецификации
Brand
MicrochipRF Technology
802.15.4
Kit Classification
Development Kit
Featured Device
AT86RF233, SE2431L
Frequency
2.4GHz
Kit Name
Amplified Zigbit Xplained Pro
Страна на произход
Malaysia
Детайли за продукта
ZigBit 2.4GHz AT86RF233 Amplified Extension Board
The Atmel ZigBit™ extension board ATZB-A-233-XPRO supports the AT86RF233 Amplified wireless transceiver module. It is used to evaluate the module and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.
ZigBit 2.4GHz AT86RF233 Amplified Module
Xplained Pro 20-pin connector
Headers for ZigBit pins not routed to Xplained Pro connector
Header for monitoring ZigBit current
ZigBit reset pushbutton
ZigBit ATZB-RF-233-1-C Amplified module
AT86RF233 2.4GHz ISM-Band Transceiver chip with SE2431L RF Front End Module (FEM)
RF Output Power: Up to +20dBm
Receiver sensitivity: -104dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Range: Up to 2000m (open space)
128byte FIFO Tx/Rx buffer
Host communication: serial SPI
Built-in chip antenna
MS-147 RF test connector
Power supply: +2.0 to +3.6Vdc
Dimensions: 25 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
MicrochipRF Technology
802.15.4
Kit Classification
Development Kit
Featured Device
AT86RF233, SE2431L
Frequency
2.4GHz
Kit Name
Amplified Zigbit Xplained Pro
Страна на произход
Malaysia
Детайли за продукта
ZigBit 2.4GHz AT86RF233 Amplified Extension Board
The Atmel ZigBit™ extension board ATZB-A-233-XPRO supports the AT86RF233 Amplified wireless transceiver module. It is used to evaluate the module and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.
ZigBit 2.4GHz AT86RF233 Amplified Module
Xplained Pro 20-pin connector
Headers for ZigBit pins not routed to Xplained Pro connector
Header for monitoring ZigBit current
ZigBit reset pushbutton
ZigBit ATZB-RF-233-1-C Amplified module
AT86RF233 2.4GHz ISM-Band Transceiver chip with SE2431L RF Front End Module (FEM)
RF Output Power: Up to +20dBm
Receiver sensitivity: -104dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Range: Up to 2000m (open space)
128byte FIFO Tx/Rx buffer
Host communication: serial SPI
Built-in chip antenna
MS-147 RF test connector
Power supply: +2.0 to +3.6Vdc
Dimensions: 25 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)