Microchip Motor Control Kit for SAMD21 for Motor
Технически документи
Спецификации
Brand
MicrochipFor Use With
Motor
Kit Classification
Development Board
Featured Device
SAMD21
Kit Name
Motor Control Kit
Детайли за продукта
ATSAMD21BLDC24V-STK BLDC Motor Control Kit
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control starter kit. The kit consists of a high-current driver board with sensing circuits and a plug-in ATSAMD21 microcontroller board.
ATBLDC24V Driver Board
• 6 x NTMFS5C646NL power MOSFETs configured as 3 x half-bridge drivers
• 3 x NCP5106A High-Side/Low-Side MOSFET gate drivers
• On-board AT25DF0181A 8Mb SPI Flash memory
• On-board AT30TSE758 I²C temperature sensor
• On-board UID Identification Chip
• Phase-current sensing for Field-Oriented Control (FOC)
• Support for Sensorless Back-EMF operation
• Support for Hall and Encoder sensor-based operation
• Over-voltage and over-current protection circuit
• 3 x LED Fault indicators
• Selectable MCU supply voltage
• 67-pin NGFF socket for MCU board
• Xplained PRO extension interface
• USB micro-B socket for connection to Main MCU
• USB micro-B socket for connection to EDBG MCU
• Screw connectors for +24V supply input
• Screw connectors for motor windings
• Screw connectors for encoder inputs
• Screw connectors for Hall sensor inputs
ATSAMD21MOTOR Microcontroller Board
• 48MHz ATSAMD21J18A Cortex-M0+ MCU with 256KB Flash memory, 32KB SRAM
• On-board debug (EDBG) circuit based on ATSAMD21J18A Cortex-M0+ MCU
• 10-pin Cortex DBG header
• Power and Status LEDs
• Reset switch
• Supported by the Atmel Studio integrated development platform
Supplied with
LDO BLDC motor (LDO: 42BL02402-0026B-002), Fully assembled chassis plate, 24Vdc @ 4A mains PSU (EDAC: EA11011E-240), USB cable.
Motor Controllers & Drivers, Microchip
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
MicrochipFor Use With
Motor
Kit Classification
Development Board
Featured Device
SAMD21
Kit Name
Motor Control Kit
Детайли за продукта
ATSAMD21BLDC24V-STK BLDC Motor Control Kit
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control starter kit. The kit consists of a high-current driver board with sensing circuits and a plug-in ATSAMD21 microcontroller board.
ATBLDC24V Driver Board
• 6 x NTMFS5C646NL power MOSFETs configured as 3 x half-bridge drivers
• 3 x NCP5106A High-Side/Low-Side MOSFET gate drivers
• On-board AT25DF0181A 8Mb SPI Flash memory
• On-board AT30TSE758 I²C temperature sensor
• On-board UID Identification Chip
• Phase-current sensing for Field-Oriented Control (FOC)
• Support for Sensorless Back-EMF operation
• Support for Hall and Encoder sensor-based operation
• Over-voltage and over-current protection circuit
• 3 x LED Fault indicators
• Selectable MCU supply voltage
• 67-pin NGFF socket for MCU board
• Xplained PRO extension interface
• USB micro-B socket for connection to Main MCU
• USB micro-B socket for connection to EDBG MCU
• Screw connectors for +24V supply input
• Screw connectors for motor windings
• Screw connectors for encoder inputs
• Screw connectors for Hall sensor inputs
ATSAMD21MOTOR Microcontroller Board
• 48MHz ATSAMD21J18A Cortex-M0+ MCU with 256KB Flash memory, 32KB SRAM
• On-board debug (EDBG) circuit based on ATSAMD21J18A Cortex-M0+ MCU
• 10-pin Cortex DBG header
• Power and Status LEDs
• Reset switch
• Supported by the Atmel Studio integrated development platform
Supplied with
LDO BLDC motor (LDO: 42BL02402-0026B-002), Fully assembled chassis plate, 24Vdc @ 4A mains PSU (EDAC: EA11011E-240), USB cable.