Mecalectro Solenoid Interlock Switch, Power to Lock, 24V dc
Технически документи
Спецификации
Brand
MecalectroPower to Lock / Unlock
Power to Lock
Supply Voltage
24V dc
Actuator Included
No
IP Rating
IP40
Depth
30mm
Width
30mm
Length
65mm
Width
30mm
IP Rating
IP40
Width
30mm
Страна на произход
France
Детайли за продукта
Electromagnetic safety locks
Designed to control the opening of mobile machine guards using an electrical signal or to act as trigger stops for a variety of applications.
Power-on locking: bolt extends when power is on, retracts as a cut-off via a built-in spring return.
Power-off locking: bolt retracts when power is on, extends as a cut-off via a built-in spring return.
The 8.458 and 8.25 series locks are fitted with a positive control safety opening switch that detects the position of the bolt. When installed in compliance with standard EN 1088, they contribute to the safe running of machines that continue to pose a danger after the operator has stopped working (EN 292).
Examples: safety position locks for mobile casings or access gates to restricted areas (high-inertia moving machines, robotic development areas, tooling centres, handling gantries, sources of radiation etc.).
Standards
EN 292, EN 60947-5-1 except for 810B528 and 810BM28
Electric Shotbolt
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 190,28
Всеки (ex VAT)
1
€ 190,28
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 190,28 |
| 5 - 9 | € 182,67 |
| 10+ | € 178,86 |
Технически документи
Спецификации
Brand
MecalectroPower to Lock / Unlock
Power to Lock
Supply Voltage
24V dc
Actuator Included
No
IP Rating
IP40
Depth
30mm
Width
30mm
Length
65mm
Width
30mm
IP Rating
IP40
Width
30mm
Страна на произход
France
Детайли за продукта
Electromagnetic safety locks
Designed to control the opening of mobile machine guards using an electrical signal or to act as trigger stops for a variety of applications.
Power-on locking: bolt extends when power is on, retracts as a cut-off via a built-in spring return.
Power-off locking: bolt retracts when power is on, extends as a cut-off via a built-in spring return.
The 8.458 and 8.25 series locks are fitted with a positive control safety opening switch that detects the position of the bolt. When installed in compliance with standard EN 1088, they contribute to the safe running of machines that continue to pose a danger after the operator has stopped working (EN 292).
Examples: safety position locks for mobile casings or access gates to restricted areas (high-inertia moving machines, robotic development areas, tooling centres, handling gantries, sources of radiation etc.).
Standards
EN 292, EN 60947-5-1 except for 810B528 and 810BM28