McLennan Servo Supplies Bipolar Hybrid Stepper Motor 1.8°, 0.29Nm, 2.3 A, 4 Wires
Технически документи
Спецификации
Shaft Diameter
5mm
Current Rating
2.3 A
Step Angle
1.8°
Страна на произход
Italy
Детайли за продукта
Size 17 Hybrid Motor
High torque similar to conventional size 23 hybrid motors
High resolution: 200 steps /rev (400 steps/rev:1/2 step)
2 Phase Bi-polar design suitable for drive stock no. 255-9065
Low inductance windings for high positioning rates
Front and rear shaft
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Shaft Diameter
5mm
Current Rating
2.3 A
Step Angle
1.8°
Страна на произход
Italy
Детайли за продукта
Size 17 Hybrid Motor
High torque similar to conventional size 23 hybrid motors
High resolution: 200 steps /rev (400 steps/rev:1/2 step)
2 Phase Bi-polar design suitable for drive stock no. 255-9065
Low inductance windings for high positioning rates
Front and rear shaft
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: