Loctite Grey High Strength, Retaining Compound Urethane Methacrylate Gel Bottle 50 ml, -55 → +150 °C Loctite
Технически документи
Спецификации
Brand
LoctiteTrade Name
LOCTITE Quick-Metal 660
Application
Bonding, Retaining
Anaerobic
Yes
Colour
Grey
Chemical Ingredients
Urethane Methacrylate
Product Form
Gel
Package Type
Bottle
Package Size
50 ml
Cure Time
20 h
Strength
High
Maximum Operating Temperature
+150°C
Minimum Operating Temperature
-55°C
Chemical Composition
Urethane Methacrylate
Operating Temperature Range
-55 → +150 °C
Страна на произход
Ireland
Детайли за продукта
Loctite® 660 Quick Metal
A single component retaining adhesive/sealant.
Non-metallic, non-running anaerobic paste which only cures between active metal surfacesProduct hardens into a tough plastic which is resistant to solvents and lubricantsFills voids between parts to prevent fretting, wear, corrosion and backlashFor use on worn metal parts eg. shafts, housings, keyways, splines and bushingsLoctite Activator N7649, stock no. 108-716 is recommended to speed up cure and promote cure through large volume gaps up to 20 thou.
Threadlocking and Retainers
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 59,67
Всеки (ex VAT)
1
€ 59,67
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 5 | € 59,67 |
| 6 - 14 | € 57,29 |
| 15+ | € 56,08 |
Технически документи
Спецификации
Brand
LoctiteTrade Name
LOCTITE Quick-Metal 660
Application
Bonding, Retaining
Anaerobic
Yes
Colour
Grey
Chemical Ingredients
Urethane Methacrylate
Product Form
Gel
Package Type
Bottle
Package Size
50 ml
Cure Time
20 h
Strength
High
Maximum Operating Temperature
+150°C
Minimum Operating Temperature
-55°C
Chemical Composition
Urethane Methacrylate
Operating Temperature Range
-55 → +150 °C
Страна на произход
Ireland
Детайли за продукта
Loctite® 660 Quick Metal
A single component retaining adhesive/sealant.
Non-metallic, non-running anaerobic paste which only cures between active metal surfacesProduct hardens into a tough plastic which is resistant to solvents and lubricantsFills voids between parts to prevent fretting, wear, corrosion and backlashFor use on worn metal parts eg. shafts, housings, keyways, splines and bushingsLoctite Activator N7649, stock no. 108-716 is recommended to speed up cure and promote cure through large volume gaps up to 20 thou.