Legris Brass 3 Way, Ball Valve, BSPP 3/8in, 40bar Operating Pressure
Технически документи
Спецификации
Brand
LegrisType
3 Way
Ball Material
Brass
Attachment Type
Threaded
Thread Standard
BSPP
Thread Size
3/8in
Body Material
Brass
Safe for Use With
Water
Handle Type
Lever
Handle Material
Zinc Alloy
Maximum Working Pressure psi
232psi
Operating Pressure
40bar
Handle Colour
Black
Maximum Working Pressure bar
20bar
Страна на произход
France
Детайли за продукта
3-Way Valves
Valve lockable in closed position only
When plate fixed to valve body and plate attached to valve stem are padlocked together, valve handle cannot be operated
Removable handle for re-orientation
Up to 3 padlocks can be applied to this valve series
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
LegrisType
3 Way
Ball Material
Brass
Attachment Type
Threaded
Thread Standard
BSPP
Thread Size
3/8in
Body Material
Brass
Safe for Use With
Water
Handle Type
Lever
Handle Material
Zinc Alloy
Maximum Working Pressure psi
232psi
Operating Pressure
40bar
Handle Colour
Black
Maximum Working Pressure bar
20bar
Страна на произход
France
Детайли за продукта
3-Way Valves
Valve lockable in closed position only
When plate fixed to valve body and plate attached to valve stem are padlocked together, valve handle cannot be operated
Removable handle for re-orientation
Up to 3 padlocks can be applied to this valve series
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.