Ledil C12095_MINNIE-M, Minnie Series LED Reflector
Технически документи
Спецификации
Brand
LedilSeries
Minnie
Product Type
LED Reflector
For Use With
Cree MT-G, Lumileds LUXEON M, Nichia NSMx286M
Dimensions
32.4 (Dia.) x 14.75mm
Diameter
32.4mm
Height
14.75mm
Beam Angle
26°
Детайли за продукта
LEDiL MINNIE Series LED Reflectors
The MINNIE series from LEDil, are a family of round LED reflectors. There are two types of reflectors within the MINNIE family, one with a PC holder and one without. They also offer a range of beam angles from medium to extra wide.
Made using a durable PC resin with an aluminium coating and protective lacquer, the MINNIE reflectors provide over 90% optical efficiency. MINNIE lenses have been designed and optimised for use with a variety of LEDs. Due to the rapidly changing nature of LED products customers are strongly advised to consult the latest manufacturer data for compatible LEDs
Reflector diameter: 35mm (with holder) or 32.4mm (without holder)
Reflector fastening: Adhesive tape (with holder) or glue (without holder)
The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED.
LEDiL Reflectors
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 3,273
Each (In a Pack of 4) (ex VAT)
4
€ 3,273
Each (In a Pack of 4) (ex VAT)
4
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 4 - 16 | € 3,273 | € 13,09 |
| 20 - 36 | € 2,718 | € 10,87 |
| 40 - 96 | € 2,586 | € 10,34 |
| 100 - 196 | € 1,973 | € 7,89 |
| 200+ | € 1,872 | € 7,49 |
Технически документи
Спецификации
Brand
LedilSeries
Minnie
Product Type
LED Reflector
For Use With
Cree MT-G, Lumileds LUXEON M, Nichia NSMx286M
Dimensions
32.4 (Dia.) x 14.75mm
Diameter
32.4mm
Height
14.75mm
Beam Angle
26°
Детайли за продукта
LEDiL MINNIE Series LED Reflectors
The MINNIE series from LEDil, are a family of round LED reflectors. There are two types of reflectors within the MINNIE family, one with a PC holder and one without. They also offer a range of beam angles from medium to extra wide.
Made using a durable PC resin with an aluminium coating and protective lacquer, the MINNIE reflectors provide over 90% optical efficiency. MINNIE lenses have been designed and optimised for use with a variety of LEDs. Due to the rapidly changing nature of LED products customers are strongly advised to consult the latest manufacturer data for compatible LEDs
Reflector diameter: 35mm (with holder) or 32.4mm (without holder)
Reflector fastening: Adhesive tape (with holder) or glue (without holder)
The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED.