ITW Switches Panel Mount Slide Switch DPDT 10 A @ 125 V ac (UL/CSA;VDC), 5 A @ 250 V ac (UL;CSA/VDC) Slide

Номер на артикул на RS: 321-307Марка: ITW Switches№ по каталога на производителя: 18-000-0040
brand-logo

Технически документи

Спецификации

Contact Configuration

DPDT

Mounting Type

Panel Mount

Contact Current Rating

10 A @ 125 V ac (UL/CSA;VDC), 5 A @ 250 V ac (UL;CSA/VDC)

Terminal Type

Tab

Actuator Type

Slide

Length

33mm

Width

19mm

Depth

15.9mm

Dimensions

33 x 19 x 15.9mm

Voltage Rating

230V

Contact Material

Silver Plated

Actuator Material

Nylon

Детайли за продукта

10 A, double pole

Two double pole sliding changeover switches for selecting operating voltage in devices with two different voltages (230 V / 115 V). The version with snap-lock fastening is locked into place in the electrical supply panel; the chassis version is mounted onto the panel using screws. Connection via 2.8 mm FAST-ON connector (110) (see Connections / Terminals chapter) or by soldering.

Approvals

VDE

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

ITW Switches Panel Mount Slide Switch DPDT 10 A @ 125 V ac (UL/CSA;VDC), 5 A @ 250 V ac (UL;CSA/VDC) Slide

P.O.A.

ITW Switches Panel Mount Slide Switch DPDT 10 A @ 125 V ac (UL/CSA;VDC), 5 A @ 250 V ac (UL;CSA/VDC) Slide
Информацията за складовите наличности временно не е налична.

Технически документи

Спецификации

Contact Configuration

DPDT

Mounting Type

Panel Mount

Contact Current Rating

10 A @ 125 V ac (UL/CSA;VDC), 5 A @ 250 V ac (UL;CSA/VDC)

Terminal Type

Tab

Actuator Type

Slide

Length

33mm

Width

19mm

Depth

15.9mm

Dimensions

33 x 19 x 15.9mm

Voltage Rating

230V

Contact Material

Silver Plated

Actuator Material

Nylon

Детайли за продукта

10 A, double pole

Two double pole sliding changeover switches for selecting operating voltage in devices with two different voltages (230 V / 115 V). The version with snap-lock fastening is locked into place in the electrical supply panel; the chassis version is mounted onto the panel using screws. Connection via 2.8 mm FAST-ON connector (110) (see Connections / Terminals chapter) or by soldering.

Approvals

VDE