ITT Cannon Male Dust Cap, Shell Size 16 IP67 Rated, Polymer

Номер на артикул на RS: 190-3425Марка: ITT Cannon№ по каталога на производителя: TNA16DCR0-02B / 192900-0393
brand-logo

Технически документи

Спецификации

Gender

Male

Shell Size

16

IP Rating

IP67

Panel Mount Fitting

Yes

Material

Polymer

Colour

Grey

Детайли за продукта

Dust Caps

Plastic dust-caps for plug and socket panel housings. Only the shell size is required to determine the correct cap. Caps include a plastic retaining strap.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

€ 6,183

Each (In a Bag of 100) (ex VAT)

ITT Cannon Male Dust Cap, Shell Size 16 IP67 Rated, Polymer

€ 6,183

Each (In a Bag of 100) (ex VAT)

ITT Cannon Male Dust Cap, Shell Size 16 IP67 Rated, Polymer
Информацията за складовите наличности временно не е налична.

Технически документи

Спецификации

Gender

Male

Shell Size

16

IP Rating

IP67

Panel Mount Fitting

Yes

Material

Polymer

Colour

Grey

Детайли за продукта

Dust Caps

Plastic dust-caps for plug and socket panel housings. Only the shell size is required to determine the correct cap. Caps include a plastic retaining strap.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.