INA HK1212-B 12mm I.D Drawn Cup Needle Roller Bearing, 18mm O.D
Технически документи
Спецификации
Brand
INAInside Diameter
12mm
Outside Diameter
18mm
Roller Bearing Type
Drawn Cup Needle
Race Width
12mm
Bore Type
Parallel
Material
Steel
Static Load Rating
7300N
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
6500N
End Type
Open
Reference Speed
15500rpm
Limiting Speed
20000rpm
Fatigue Limit Load
860N
Maximum Speed - Grease
12000rpm
Maximum Speed - Oil
20000rpm
Детайли за продукта
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole
INA
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 5,64
Всеки (ex VAT)
1
€ 5,64
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 5,64 |
| 5 - 9 | € 5,42 |
| 10 - 24 | € 5,29 |
| 25+ | € 5,20 |
Технически документи
Спецификации
Brand
INAInside Diameter
12mm
Outside Diameter
18mm
Roller Bearing Type
Drawn Cup Needle
Race Width
12mm
Bore Type
Parallel
Material
Steel
Static Load Rating
7300N
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
6500N
End Type
Open
Reference Speed
15500rpm
Limiting Speed
20000rpm
Fatigue Limit Load
860N
Maximum Speed - Grease
12000rpm
Maximum Speed - Oil
20000rpm
Детайли за продукта
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole