INA Bearing Inserts 16.2mm ID 40mm OD 203-XL-KRR-AH02
Технически документи
Спецификации
Brand
INAInside Diameter
16.2mm
Outside Diameter
40mm
Material
Steel
Dynamic Load Rating
10100N
Static Load Rating
4750N
Number of Rows
1
Race Type
Plain
Bore Type
Parallel
Детайли за продукта
Deep Groove Ball Bearing with Extended Inner
INA from Schaeffler bearings have a cylindrical outer ring and are fitted in cylindrical bores. The inner ring is extended on both sides and is on the shaft using a location fit. Due to the extended inner ring, extra axial spacer rings are not required.
The concentric seat allows for speeds equivalent to standard ball bearings, while the load can be either constant or alternating. Smooth running is also achieved.
R seals have two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. They deliver better protection against mechanical damage.
Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.
Features and Benefits
• Sealed on both sides using R type seals
• The sheet steel washers extended outwards and angled downwards form a large grease reservoir
INA
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 21,03
Всеки (ex VAT)
1
€ 21,03
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 21,03 |
| 5 - 9 | € 20,20 |
| 10 - 24 | € 19,76 |
| 25+ | € 19,34 |
Технически документи
Спецификации
Brand
INAInside Diameter
16.2mm
Outside Diameter
40mm
Material
Steel
Dynamic Load Rating
10100N
Static Load Rating
4750N
Number of Rows
1
Race Type
Plain
Bore Type
Parallel
Детайли за продукта
Deep Groove Ball Bearing with Extended Inner
INA from Schaeffler bearings have a cylindrical outer ring and are fitted in cylindrical bores. The inner ring is extended on both sides and is on the shaft using a location fit. Due to the extended inner ring, extra axial spacer rings are not required.
The concentric seat allows for speeds equivalent to standard ball bearings, while the load can be either constant or alternating. Smooth running is also achieved.
R seals have two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. They deliver better protection against mechanical damage.
Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.
Features and Benefits
• Sealed on both sides using R type seals
• The sheet steel washers extended outwards and angled downwards form a large grease reservoir