Huco Reducing Bush 257.25, 7mm Shaft Diameter, 10mm Outside Diameter
Технически документи
Спецификации
Brand
HucoShaft Diameter
7mm
Outside Diameter
10mm
Length
8.1mm
Material
Aluminium Alloy
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+120°C
Страна на произход
United Kingdom
Детайли за продукта
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 8,286
Each (In a Pack of 2) (ex VAT)
2
€ 8,286
Each (In a Pack of 2) (ex VAT)
2
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 2 - 8 | € 8,286 | € 16,57 |
| 10 - 18 | € 7,982 | € 15,96 |
| 20 - 48 | € 7,815 | € 15,63 |
| 50+ | € 7,624 | € 15,25 |
Технически документи
Спецификации
Brand
HucoShaft Diameter
7mm
Outside Diameter
10mm
Length
8.1mm
Material
Aluminium Alloy
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+120°C
Страна на произход
United Kingdom
Детайли за продукта
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C