Harting, D-Sub Standard Series, Male Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
Технически документи
Спецификации
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Страна на произход
Germany
Детайли за продукта
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 0,172
Each (On a Reel of 500) (ex VAT)
500
€ 0,172
Each (On a Reel of 500) (ex VAT)
500
Купете в насипно състояние
| количество | Единична цена | Per Ролка |
|---|---|---|
| 500 - 1000 | € 0,172 | € 85,96 |
| 1500 - 2500 | € 0,157 | € 78,36 |
| 3000 - 4500 | € 0,152 | € 76,02 |
| 5000+ | € 0,149 | € 74,26 |
Технически документи
Спецификации
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Страна на произход
Germany
Детайли за продукта
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807