Технически документи
Спецификации
Brand
HartingGender
Female
Wire Size
24 → 28 AWG
Contact Material
Brass
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.09mm²
Maximum Wire Size mm²
0.25mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.1mm
Minimum Wire Size AWG
28AWG
Maximum Wire Size AWG
24AWG
Страна на произход
Germany
Детайли за продукта
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
Stock number 740-6657 is an Insertion and Extraction Tool
Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 0,298
Each (In a Pack of 25) (ex VAT)
25
€ 0,298
Each (In a Pack of 25) (ex VAT)
25
Купете в насипно състояние
количество | Единична цена | Per Опаковка |
---|---|---|
25 - 75 | € 0,298 | € 7,46 |
100 - 225 | € 0,283 | € 7,08 |
250 - 475 | € 0,251 | € 6,29 |
500+ | € 0,246 | € 6,14 |
Технически документи
Спецификации
Brand
HartingGender
Female
Wire Size
24 → 28 AWG
Contact Material
Brass
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.09mm²
Maximum Wire Size mm²
0.25mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.1mm
Minimum Wire Size AWG
28AWG
Maximum Wire Size AWG
24AWG
Страна на произход
Germany
Детайли за продукта
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
Stock number 740-6657 is an Insertion and Extraction Tool
Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807