Fluke Fluke Scope Meter 120 Series ITP120 Oscilloscope Probe, Isolated Trigger Probe Type, 50kHz, Mini Hook Clip
Технически документи
Спецификации
Brand
FlukeProbe Type
Isolated Trigger Probe
Bandwidth
50kHz
Maximum Common Mode Input Voltage
600V
Connector Type
Mini Hook Clip Connector
Model Number p
ITP120
Safety Category Level
CAT II
Safety Category Voltage
600V
Series
Fluke Scope Meter 120
Safety Category
CAT II 600 V
Страна на произход
Netherlands
Детайли за продукта
Fluke 120 Series Isolated Trigger Probe ITP120
The Fluke ITP120 is an optically isolated trigger probe for use with Fluke 120 series ScopeMeter handheld oscilloscopes. The probe connects to the optical port of the ScopeMeter 120. It features isolated external triggering, for measurements that require external triggering or triggering on floating reference signals. Probe length is 1.2m (48 inch).
Maximum floating voltage to ground 600V
Maximum input voltage 600V (with 600V Mini Testhook)
Maximum non-destructive input voltage times frequency 109
Input resistance 10 MΩ ± 1%
Input capacitance 15 pF ± 10%
Probe reach 1.2 m (48 inches)
Trigger level TTL compatible (High > 2V, Low < 0.8V)
Minimum pulse width 7 μs
Frequency range DC to 50 kHz
Trigger slope selectable on the ScopeMeter test tool
Battery type Alkaline 9 volt, NEDA, IEC6LR61 (supplied)
Battery life 60 hour operation approximately
Supplied with
hook clip with ground lead, 9V battery (installed)
Fluke Industrial ScopeMeters
The small, lightweight hand held digital oscilloscopes are ideal for use by technicians working in service, maintenance and installation applications. Features include:
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
FlukeProbe Type
Isolated Trigger Probe
Bandwidth
50kHz
Maximum Common Mode Input Voltage
600V
Connector Type
Mini Hook Clip Connector
Model Number p
ITP120
Safety Category Level
CAT II
Safety Category Voltage
600V
Series
Fluke Scope Meter 120
Safety Category
CAT II 600 V
Страна на произход
Netherlands
Детайли за продукта
Fluke 120 Series Isolated Trigger Probe ITP120
The Fluke ITP120 is an optically isolated trigger probe for use with Fluke 120 series ScopeMeter handheld oscilloscopes. The probe connects to the optical port of the ScopeMeter 120. It features isolated external triggering, for measurements that require external triggering or triggering on floating reference signals. Probe length is 1.2m (48 inch).
Maximum floating voltage to ground 600V
Maximum input voltage 600V (with 600V Mini Testhook)
Maximum non-destructive input voltage times frequency 109
Input resistance 10 MΩ ± 1%
Input capacitance 15 pF ± 10%
Probe reach 1.2 m (48 inches)
Trigger level TTL compatible (High > 2V, Low < 0.8V)
Minimum pulse width 7 μs
Frequency range DC to 50 kHz
Trigger slope selectable on the ScopeMeter test tool
Battery type Alkaline 9 volt, NEDA, IEC6LR61 (supplied)
Battery life 60 hour operation approximately
Supplied with
hook clip with ground lead, 9V battery (installed)
Fluke Industrial ScopeMeters
The small, lightweight hand held digital oscilloscopes are ideal for use by technicians working in service, maintenance and installation applications. Features include: