Fluke I1010 Multimeter Current Clamp Adapter, 1000A DC Max, AC/DC Adapter, 600A ac AC Max, Voltage Output - RS
Технически документи
Спецификации
Brand
FlukeAdapter Type
AC/DC
Maximum DC Current
1000A
Maximum ac Current
600A ac
Best Accuracy
±2% + 0.5 A
Maximum Conductor Size
30mm
Calibrated
RSCAL
Safety Category
CAT III 600V
Output Type
Voltage
Connector Type
Banana Plug
Battery Type
9 V
Battery Life
60 h
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-10°C
Model Number p
I1010
Safety Category Level
CAT III
Safety Category Voltage
600V
Страна на произход
Thailand
Детайли за продукта
Fluke Current Probes
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 789,24
Всеки (ex VAT)
1
€ 789,24
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
FlukeAdapter Type
AC/DC
Maximum DC Current
1000A
Maximum ac Current
600A ac
Best Accuracy
±2% + 0.5 A
Maximum Conductor Size
30mm
Calibrated
RSCAL
Safety Category
CAT III 600V
Output Type
Voltage
Connector Type
Banana Plug
Battery Type
9 V
Battery Life
60 h
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-10°C
Model Number p
I1010
Safety Category Level
CAT III
Safety Category Voltage
600V
Страна на произход
Thailand
Детайли за продукта
Fluke Current Probes
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.