FLUKE-725/9102/RS Drywell Calibrator, 24mA dc, 0 → 30V dc
Технически документи
Спецификации
Brand
FlukeThermocouple Type
B, E, J, K, L, N, R, S, T, U
Width
152mm
Length
175mm
Dimensions
175 x 152 x 100mm
PRICED TO CLEAR
Yes
Height
100mm
Model Number p
725
Weight
1.8kg
Страна на произход
United States
Детайли за продукта
Fluke 725 & 9102S Drywell Temperature Calibrator Kit
Drywell Calibration Kits comprising the Fluke 725 process calibrator and 9102S drywell heat source
725 features
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
9102S features
Contact temperature calibration over a range of -10°C to 122°C
A stable and uniform heat source
Fast to change temperature to set point with short stabilization times
Accuracy to 0.25°C and stability to 0.05°C
Removable insert sleeves supplied allow various diameter probes to be accommodated
Supplied with
725 process calibrator, test leads/clips, protective yellow holster; 9102S drywell, batteries, 9102S power Cord, RS-232 Cable, 9930 Interface-it Software.
Fluke 725 Drywell Calibration Kits
The Fluke 725 Drywell Calibration Kits couples the Fluke 725 with a highly portable and compact drywell heat source with a saving over buying the products separately.,The kit offers a rugged, handheld solution for the accurate calibration of temperature sensors and troubleshooting of process control instrumentation.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
FlukeThermocouple Type
B, E, J, K, L, N, R, S, T, U
Width
152mm
Length
175mm
Dimensions
175 x 152 x 100mm
PRICED TO CLEAR
Yes
Height
100mm
Model Number p
725
Weight
1.8kg
Страна на произход
United States
Детайли за продукта
Fluke 725 & 9102S Drywell Temperature Calibrator Kit
Drywell Calibration Kits comprising the Fluke 725 process calibrator and 9102S drywell heat source
725 features
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
9102S features
Contact temperature calibration over a range of -10°C to 122°C
A stable and uniform heat source
Fast to change temperature to set point with short stabilization times
Accuracy to 0.25°C and stability to 0.05°C
Removable insert sleeves supplied allow various diameter probes to be accommodated
Supplied with
725 process calibrator, test leads/clips, protective yellow holster; 9102S drywell, batteries, 9102S power Cord, RS-232 Cable, 9930 Interface-it Software.
Fluke 725 Drywell Calibration Kits
The Fluke 725 Drywell Calibration Kits couples the Fluke 725 with a highly portable and compact drywell heat source with a saving over buying the products separately.,The kit offers a rugged, handheld solution for the accurate calibration of temperature sensors and troubleshooting of process control instrumentation.