LCBSB-12-01 ART, 19.1mm High Nylon PCB Support for 4mm PCB Hole, 17.8 x 17.8mm Base
Технически документи
Спецификации
Brand
EssentraPCB Support Type
Adhesive-Backed Support
Overall Height
29.3mm
Body Height
19.1mm
Support Base Dimensions
17.8 x 17.8mm
PCB Hole Diameter
4mm
PCB Thickness
1.57mm
Material
Nylon
Support Base Length
17.8mm
Support Base Width
17.8mm
Страна на произход
United Kingdom
Детайли за продукта
Standard Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 0,36
Each (In a Pack of 25) (ex VAT)
25
€ 0,36
Each (In a Pack of 25) (ex VAT)
25
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 25 - 225 | € 0,36 | € 8,99 |
| 250 - 475 | € 0,346 | € 8,64 |
| 500 - 1225 | € 0,336 | € 8,41 |
| 1250+ | € 0,306 | € 7,65 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Технически документи
Спецификации
Brand
EssentraPCB Support Type
Adhesive-Backed Support
Overall Height
29.3mm
Body Height
19.1mm
Support Base Dimensions
17.8 x 17.8mm
PCB Hole Diameter
4mm
PCB Thickness
1.57mm
Material
Nylon
Support Base Length
17.8mm
Support Base Width
17.8mm
Страна на произход
United Kingdom
Детайли за продукта
Standard Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products