ELT 18 W, 24 W, 30 W, 36 W, 39 W Electronic Compact Fluorescent Lighting Ballast, 220 → 240 V
Технически документи
Спецификации
Brand
ELTWattage
18 W, 24 W, 30 W, 36 W, 39 W
Ballast Type
Electronic
Supported Lamp Shape
T5, T8, TC-L
Supported Lamp Type
Compact Fluorescent, Fluorescent
Voltage Rating
220 → 240 V
Dimmable
No
High Frequency
Yes
Length
360 mm
Height
28mm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+50°C
Страна на произход
Spain
Детайли за продукта
3 & 4 Lamp Electronic Ballast
ELT 3 & 4 lamp electronic high frequency ballasts for controlling T8 / TC-L / T5 fluorescent lamps.
BE 436-2 ballasts con be connected to three or four lamps
Model BE 436 is designed with independent lamps
Class I ballast for built-in use
Ignition with preheating in cathodes for a long life in the lamp, without flashes or flickering
Constant total power and stabilized luminous flux
High frequency operation
High energy efficiency
Corrected stroboscopic effect
Allows the use of Class I and Class II luminaires without screening to earth in the lamps
Permitted voltage 198-264V, 50-60Hz
Supports 2 hours at 350V (A/C)
Rapid connection connector with fixing spring. Circular conductor section: 0.5-1.5 mm2
Standards
EN 61347-1-2-3, EN 60929, EN 61000-3-2, EN 55015, EN 61547.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 46,59
Всеки (ex VAT)
1
€ 46,59
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
ELTWattage
18 W, 24 W, 30 W, 36 W, 39 W
Ballast Type
Electronic
Supported Lamp Shape
T5, T8, TC-L
Supported Lamp Type
Compact Fluorescent, Fluorescent
Voltage Rating
220 → 240 V
Dimmable
No
High Frequency
Yes
Length
360 mm
Height
28mm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+50°C
Страна на произход
Spain
Детайли за продукта
3 & 4 Lamp Electronic Ballast
ELT 3 & 4 lamp electronic high frequency ballasts for controlling T8 / TC-L / T5 fluorescent lamps.
BE 436-2 ballasts con be connected to three or four lamps
Model BE 436 is designed with independent lamps
Class I ballast for built-in use
Ignition with preheating in cathodes for a long life in the lamp, without flashes or flickering
Constant total power and stabilized luminous flux
High frequency operation
High energy efficiency
Corrected stroboscopic effect
Allows the use of Class I and Class II luminaires without screening to earth in the lamps
Permitted voltage 198-264V, 50-60Hz
Supports 2 hours at 350V (A/C)
Rapid connection connector with fixing spring. Circular conductor section: 0.5-1.5 mm2
Standards
EN 61347-1-2-3, EN 60929, EN 61000-3-2, EN 55015, EN 61547.