Efergy 90AS Series Split Core Current Transformer, 12mm Bore
Технически документи
Спецификации
Brand
EfergyBore Size
12mm
Series
90AS
Transformer Type
Split Core
Overall Width
20.5mm
For Use With
Data Loggers/DAS, Digital or Analog Meters, DMMs, Recorders
Страна на произход
China
Детайли за продукта
Efergy Jackplug Extra Sensor
Additional sensors for use with e2 and elite energy monitors. Both models of energy monitor come supplied with one sensor. If you are operating a 3-phase supply then you will require two additional sensors.
Sensor voltage range: 110V-300V
Measuring current: 50mA-120A (819-9798) or 50mA-95A (819-9779)
Can attach around a cable with a diameter up to 19mm (819-9798) or 12mm (819-9779)
How it works
All transmitters come with three spaces for sensors. Just look on the underside of the transmitter, take out the rubber cover of one of the spare spaces and plug in your additional sensor. Then attach it the same way as the previous one.
If you are purchasing a sensor for a monitor that you already own, check the connection type between the sensor and transmitter before ordering, to ensure you receive the correct product.
If you have an older monitor you may require the old 'DC' style fitments of sensor.
Wireless Power Meters
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 12,42
Всеки (ex VAT)
1
€ 12,42
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 12,42 |
| 5 - 9 | € 12,06 |
| 10+ | € 11,77 |
Технически документи
Спецификации
Brand
EfergyBore Size
12mm
Series
90AS
Transformer Type
Split Core
Overall Width
20.5mm
For Use With
Data Loggers/DAS, Digital or Analog Meters, DMMs, Recorders
Страна на произход
China
Детайли за продукта
Efergy Jackplug Extra Sensor
Additional sensors for use with e2 and elite energy monitors. Both models of energy monitor come supplied with one sensor. If you are operating a 3-phase supply then you will require two additional sensors.
Sensor voltage range: 110V-300V
Measuring current: 50mA-120A (819-9798) or 50mA-95A (819-9779)
Can attach around a cable with a diameter up to 19mm (819-9798) or 12mm (819-9779)
How it works
All transmitters come with three spaces for sensors. Just look on the underside of the transmitter, take out the rubber cover of one of the spare spaces and plug in your additional sensor. Then attach it the same way as the previous one.
If you are purchasing a sensor for a monitor that you already own, check the connection type between the sensor and transmitter before ordering, to ensure you receive the correct product.
If you have an older monitor you may require the old 'DC' style fitments of sensor.