Eccel Technology Ltd OEM-MICODE-RS232 (000127) RFID Reader, 5V

Номер на артикул на RS: 126-2182Марка: Eccel Technology Ltd№ по каталога на производителя: OEM-MICODE-RS232 (000127)
brand-logo
Преглед на всички в RF модули

Технически документи

Спецификации

Component Type

Reader

Supported Bus Interfaces

RS232

Supply Voltage

5V

Length

75mm

Width

50mm

Страна на произход

United Kingdom

Детайли за продукта

OEM-MICODE RFID Reader Boards

The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k,
Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)

Features:

• Complete “plug-and-go” RFID Read / Write system
• Integrated PCB antenna, LEDS, RS232 or USB interface.
• Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
• Average current consumption down to 100 micro Amps even when fully active
• Auxiliary output options for automatic data output as serial or Wiegand protocol

RFID - Eccel

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

Eccel Technology Ltd OEM-MICODE-RS232 (000127) RFID Reader, 5V

P.O.A.

Eccel Technology Ltd OEM-MICODE-RS232 (000127) RFID Reader, 5V
Информацията за складовите наличности временно не е налична.

Технически документи

Спецификации

Component Type

Reader

Supported Bus Interfaces

RS232

Supply Voltage

5V

Length

75mm

Width

50mm

Страна на произход

United Kingdom

Детайли за продукта

OEM-MICODE RFID Reader Boards

The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k,
Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)

Features:

• Complete “plug-and-go” RFID Read / Write system
• Integrated PCB antenna, LEDS, RS232 or USB interface.
• Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
• Average current consumption down to 100 micro Amps even when fully active
• Auxiliary output options for automatic data output as serial or Wiegand protocol

RFID - Eccel