Dold Phase Monitoring Relay, 3 Phase, SPDT, DIN Rail
Технически документи
Спецификации
Brand
DoldMonitoring Application
Phase
Electrical Phase
3
Contact Configuration
SPDT
Mounting Type
DIN Rail
Time Delay
0 → 10s
Series
BH 9097
Height
84mm
Length
121mm
Operating Temperature Range
+55°C
Minimum Operating Temperature
-20°C
Width
45mm
Maximum Operating Temperature
+55°C
Dimensions
121 x 45 x 84mm
Страна на произход
Germany
Детайли за продукта
Load monitor BH 9097
The load monitor is suitable for monitoring electrical industrial drive systems with variable motor loads.
Features:
The BH 9097 load monitor monitors the actual power consumption of electrical loads
The device can be configured via DIP switches for negative load and overload monitoring or for overload monitoring with preliminary warning level
P1 and P2 settings are calibrated as absolute values; configuration via two rotary switches
Test / reset buttons for simple start-up
Switch state indicator via 2 LEDs
For motors up to 22 KW at 3 AC 400 V, without auxiliary voltage
Up to 40 A without external current transformer
Configurable start-up bridging, configurable response delay
Overall width 45 mm
Standards
IEC 255, EN 60255, VDE 0435 part 303
Load monitor
€ 526,14
€ 526,14 Всеки (ex VAT)
1
€ 526,14
€ 526,14 Всеки (ex VAT)
1
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
Технически документи
Спецификации
Brand
DoldMonitoring Application
Phase
Electrical Phase
3
Contact Configuration
SPDT
Mounting Type
DIN Rail
Time Delay
0 → 10s
Series
BH 9097
Height
84mm
Length
121mm
Operating Temperature Range
+55°C
Minimum Operating Temperature
-20°C
Width
45mm
Maximum Operating Temperature
+55°C
Dimensions
121 x 45 x 84mm
Страна на произход
Germany
Детайли за продукта
Load monitor BH 9097
The load monitor is suitable for monitoring electrical industrial drive systems with variable motor loads.
Features:
The BH 9097 load monitor monitors the actual power consumption of electrical loads
The device can be configured via DIP switches for negative load and overload monitoring or for overload monitoring with preliminary warning level
P1 and P2 settings are calibrated as absolute values; configuration via two rotary switches
Test / reset buttons for simple start-up
Switch state indicator via 2 LEDs
For motors up to 22 KW at 3 AC 400 V, without auxiliary voltage
Up to 40 A without external current transformer
Configurable start-up bridging, configurable response delay
Overall width 45 mm
Standards
IEC 255, EN 60255, VDE 0435 part 303
Load monitor