DesignSpark 5V Input Uninterruptible Power Supply (10W)
Технически документи
Спецификации
Brand
DesignSparkPower Rating
10W
Output Voltage
5V
Input Voltage
5V
Backup Time
75min
Number of Outlets
1
Type
Buffer Module
Current Rating
2A
Length
1100mm
Width
600mm
Depth
23mm
Страна на произход
Netherlands
Детайли за продукта
Mini UPS for SBC applications, 5V 2A
A mini UPS (Uninterruptable Power Supply) intended for use with single board computers such as the Raspberry Pi or BeagleBoard. This PCB module can be interposed between the 5V supply and SBC allowing several hours of operation from the on-board Li-ion battery in the event of supply failure. On, Off or Programmable modes of operation are selected via a 3-position switch and a 5-pin connector is provided for signalling and auxiliary 5V output.
5 Volt input via micro USB connector
5 Volt output via USB-A connector plus auxiliary 5V output
Maximum current rating 2A
On-board 2800 mA-h Li-ion battery
High efficiency power conversion circuitry (>90% )
Signalling to/from computer report status and turn off the UPS
Status LEDs for Power In/Out/Charging and Shutdown
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
DesignSparkPower Rating
10W
Output Voltage
5V
Input Voltage
5V
Backup Time
75min
Number of Outlets
1
Type
Buffer Module
Current Rating
2A
Length
1100mm
Width
600mm
Depth
23mm
Страна на произход
Netherlands
Детайли за продукта
Mini UPS for SBC applications, 5V 2A
A mini UPS (Uninterruptable Power Supply) intended for use with single board computers such as the Raspberry Pi or BeagleBoard. This PCB module can be interposed between the 5V supply and SBC allowing several hours of operation from the on-board Li-ion battery in the event of supply failure. On, Off or Programmable modes of operation are selected via a 3-position switch and a 5-pin connector is provided for signalling and auxiliary 5V output.
5 Volt input via micro USB connector
5 Volt output via USB-A connector plus auxiliary 5V output
Maximum current rating 2A
On-board 2800 mA-h Li-ion battery
High efficiency power conversion circuitry (>90% )
Signalling to/from computer report status and turn off the UPS
Status LEDs for Power In/Out/Charging and Shutdown