Chauvin Arnoux E3N Current Clamp, 150A DC Max, AC/DC Adapter, 150A ac AC Max
Технически документи
Спецификации
Brand
Chauvin ArnouxAdapter Type
AC/DC
Maximum DC Current
150A
Maximum ac Current
150A ac
Best Accuracy
±3%
Maximum Conductor Size
12mm
Safety Category
CAT IV 300 V, CAT III 600V
Connector Type
BNC to Banana Plug
Maximum Bandwidth
100kHz
Bandwidth
DC → 100kHz
Model Number p
E3N
Safety Category Level
CAT III, CAT IV
Safety Category Voltage
300 V, 600V
Страна на произход
France
Детайли за продукта
Chauvin Arnoux E3 AC/DC Probe
The E3N clamp has been designed to measure AC and DC currents by using Hall-effect technology. Due to its shape this clamp is ideal for measurements in cable bundles and confined spaces especially the wiring on switchboards.
Features:
- Current clamp specifically designed for use with oscilloscopes
- Clamp makes it possible to monitor current waveforms directly and without breaking a connection
- 9V Battery
- Dimensions 231 x 67 x 36 mm
- Weight 330g
- Casing protection IP20 rating
- Can withstand 1m drop test
- Battery level indicator – green LED when greater than 6.5 V
- Overload indication for safety – red LED indicates the measured current is too high for the selected range
Warning
Not to be used on conductors where the potential exceeds 650V r.m.s.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
Calibration type
No Calibration
1
P.O.A.
Calibration type
No Calibration
1
Технически документи
Спецификации
Brand
Chauvin ArnouxAdapter Type
AC/DC
Maximum DC Current
150A
Maximum ac Current
150A ac
Best Accuracy
±3%
Maximum Conductor Size
12mm
Safety Category
CAT IV 300 V, CAT III 600V
Connector Type
BNC to Banana Plug
Maximum Bandwidth
100kHz
Bandwidth
DC → 100kHz
Model Number p
E3N
Safety Category Level
CAT III, CAT IV
Safety Category Voltage
300 V, 600V
Страна на произход
France
Детайли за продукта
Chauvin Arnoux E3 AC/DC Probe
The E3N clamp has been designed to measure AC and DC currents by using Hall-effect technology. Due to its shape this clamp is ideal for measurements in cable bundles and confined spaces especially the wiring on switchboards.
Features:
- Current clamp specifically designed for use with oscilloscopes
- Clamp makes it possible to monitor current waveforms directly and without breaking a connection
- 9V Battery
- Dimensions 231 x 67 x 36 mm
- Weight 330g
- Casing protection IP20 rating
- Can withstand 1m drop test
- Battery level indicator – green LED when greater than 6.5 V
- Overload indication for safety – red LED indicates the measured current is too high for the selected range
Warning
Not to be used on conductors where the potential exceeds 650V r.m.s.