Chauvin Arnoux MN60 Current Clamp, AC Adapter, 200 A ac AC Max - RSCAL
Технически документи
Спецификации
Brand
Chauvin ArnouxProduct Type
Current Clamp
Adapter Type
AC
Maximum AC Current
200A ac
Accuracy
±1.5% + 5 mV
Maximum Conductor Size
20mm
Cable Length
1.5mm
Battery Type
AA, Alkaline, LR6
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
55°C
Model Number
MN60
Standards/Approvals
No
Calibrated
RSCAL
Safety Category Level
CAT III, CAT I
Safety Category Voltage
500V
Страна на произход
France
Детайли за продукта
Chauvin Arnoux MN60 Mini Clamps
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.
Safe, non intrusive current measurement
40Hz to 10kHz bandwidth
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Max. conductor size 20mm dia. or 20 x 5mm bus bar
Fitted with a 2m coaxial lead and 50Ω BNC plug to suit most analogue & digital oscilloscopes
Conforms to IEC1010-2-032 (safety standard) 600V Cat III
Информацията за складовите наличности временно не е налична.
€ 404,84
€ 404,84 Всеки (ex VAT)
Calibration type
RS Calibration
1
€ 404,84
€ 404,84 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
Calibration type
RS Calibration
1
Технически документи
Спецификации
Brand
Chauvin ArnouxProduct Type
Current Clamp
Adapter Type
AC
Maximum AC Current
200A ac
Accuracy
±1.5% + 5 mV
Maximum Conductor Size
20mm
Cable Length
1.5mm
Battery Type
AA, Alkaline, LR6
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
55°C
Model Number
MN60
Standards/Approvals
No
Calibrated
RSCAL
Safety Category Level
CAT III, CAT I
Safety Category Voltage
500V
Страна на произход
France
Детайли за продукта
Chauvin Arnoux MN60 Mini Clamps
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.
Safe, non intrusive current measurement
40Hz to 10kHz bandwidth
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Max. conductor size 20mm dia. or 20 x 5mm bus bar
Fitted with a 2m coaxial lead and 50Ω BNC plug to suit most analogue & digital oscilloscopes
Conforms to IEC1010-2-032 (safety standard) 600V Cat III