Технически документи
Спецификации
Brand
BroadcomSensor Type
Light Intensity to Digital Signal
Array Size
1 x 1
Mounting Type
Surface Mount
Package Type
ChipLED
Pin Count
6
Dimensions
2 x 2 x 0.65mm
Height
0.65mm
Interface
Serial (2 Wire I²C)
Length
2mm
Maximum Operating Supply Voltage
3 V
Maximum Operating Temperature
+85 °C
Width
2mm
Minimum Operating Temperature
-30 °C
Minimum Operating Supply Voltage
2.4 V
Technology
Analogue, Digital
Страна на произход
Thailand
Детайли за продукта
APDS-9309 Ambient Light Photo Sensor
The Avago Technologies digital APDS-9309 is an ambient light sensor with an I2C interface. The photo sensor converts light intensity to a digital signal output. The sensor operates two photodiodes, ADC and the ambient light levels are near to the human eye response. The light sensor is ideal in applications including a range of lighting conditions. They can be used for display backlight control, mobile and computer devices, signs and signal and lighting management.
Digital output: 16 Bit
I2C interface compatible with dedicated interrupt pin
I2C Fast-Mode at 400 kHz
Dual diode architecture to approximate the human eye response
50/60 Hz Lighting Ripple Rejection
Low 2.5 V Input Voltage and 1.8 V Digital Output
Low Active Power (0.6 mW Typical) with Power Down Mode
RoHS Compliant
Miniature Chip LED Package: Length 2 mm x Width 2 mm x Height 0.65 mm
Ambient Light Sensors, Avago Technologies
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
2500
P.O.A.
2500
Технически документи
Спецификации
Brand
BroadcomSensor Type
Light Intensity to Digital Signal
Array Size
1 x 1
Mounting Type
Surface Mount
Package Type
ChipLED
Pin Count
6
Dimensions
2 x 2 x 0.65mm
Height
0.65mm
Interface
Serial (2 Wire I²C)
Length
2mm
Maximum Operating Supply Voltage
3 V
Maximum Operating Temperature
+85 °C
Width
2mm
Minimum Operating Temperature
-30 °C
Minimum Operating Supply Voltage
2.4 V
Technology
Analogue, Digital
Страна на произход
Thailand
Детайли за продукта
APDS-9309 Ambient Light Photo Sensor
The Avago Technologies digital APDS-9309 is an ambient light sensor with an I2C interface. The photo sensor converts light intensity to a digital signal output. The sensor operates two photodiodes, ADC and the ambient light levels are near to the human eye response. The light sensor is ideal in applications including a range of lighting conditions. They can be used for display backlight control, mobile and computer devices, signs and signal and lighting management.
Digital output: 16 Bit
I2C interface compatible with dedicated interrupt pin
I2C Fast-Mode at 400 kHz
Dual diode architecture to approximate the human eye response
50/60 Hz Lighting Ripple Rejection
Low 2.5 V Input Voltage and 1.8 V Digital Output
Low Active Power (0.6 mW Typical) with Power Down Mode
RoHS Compliant
Miniature Chip LED Package: Length 2 mm x Width 2 mm x Height 0.65 mm