Технически документи
Спецификации
Brand
BoplaPanel Type
Front Panel
Width
56.3mm
Height
2mm
Length
282mm
Material
Aluminium
Colour
Natural
Colour
Natural
For Use With
Ultramas Enclosures
Страна на произход
Germany
Детайли за продукта
ABS Eurocard compatible case, Ultramas19 Series
Four Eurocard compatible cases made of light grey ABS plastic, 3 HU or 6 HU high, with or without ventilation. The cases can be set up to be free-standing or stacked (front and back panels must be ordered separately). All cases have a width of 9 sub-units (1 sub-unit = 5.08 mm) and accept 160 mm PCB Eurocards with 3 HU or 6 HU. The depth is always 199 mm (exterior dimensions).
Eight screw hole covers are also supplied, and can be fitted on top or on the side to keep the case horizontal and vertical or to allow it to be stacked. Feet/tilt feet for vertical or horizontal set-up are supplied. The 2 mm thick anodised aluminium front and back panels can be slotted into the case and contribute to the overall clean image.
The width of the case can be increased by 9 sub-units using the extension set.
The case can be mounted on a wall using the wall brackets. The case's clearance from the floor can be increased to improve ventilation using the foot kit.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 9,54
Всеки (ex VAT)
1
€ 9,54
Всеки (ex VAT)
1
Купете в насипно състояние
количество | Единична цена |
---|---|
1 - 9 | € 9,54 |
10 - 14 | € 9,15 |
15+ | € 8,75 |
Технически документи
Спецификации
Brand
BoplaPanel Type
Front Panel
Width
56.3mm
Height
2mm
Length
282mm
Material
Aluminium
Colour
Natural
Colour
Natural
For Use With
Ultramas Enclosures
Страна на произход
Germany
Детайли за продукта
ABS Eurocard compatible case, Ultramas19 Series
Four Eurocard compatible cases made of light grey ABS plastic, 3 HU or 6 HU high, with or without ventilation. The cases can be set up to be free-standing or stacked (front and back panels must be ordered separately). All cases have a width of 9 sub-units (1 sub-unit = 5.08 mm) and accept 160 mm PCB Eurocards with 3 HU or 6 HU. The depth is always 199 mm (exterior dimensions).
Eight screw hole covers are also supplied, and can be fitted on top or on the side to keep the case horizontal and vertical or to allow it to be stacked. Feet/tilt feet for vertical or horizontal set-up are supplied. The 2 mm thick anodised aluminium front and back panels can be slotted into the case and contribute to the overall clean image.
The width of the case can be increased by 9 sub-units using the extension set.
The case can be mounted on a wall using the wall brackets. The case's clearance from the floor can be increased to improve ventilation using the foot kit.