Bopla Elegant Series Grey Polystyrene Enclosure, IP40, Grey Lid, 200 x 112 x 70mm
Технически документи
Спецификации
Brand
BoplaBody Material
Polystyrene
External Length
200 mm
External Height
70 mm
External Width
112 mm
External Dimensions
200 x 112 x 70mm
IP Rating
IP40
Colour
Grey
Lid Colour
Grey
Series
Elegant
Number of Knockouts
7
Weight
278g
Страна на произход
Germany
Детайли за продукта
Desktop and wall housing
A series of elegant table and wall housings made of impact-resistant polystyrene. They are used for the installation of small appliances, and many other components. The housings are made up of two half shells; the upper part is light grey (similar to RAL 7035) and the lower part is agate grey (similar to RAL 7038). The screw connection is made from below with 4 screws. There are mounting bosses for self-tapping screws in the upper and lower parts for board mounting. There are also insertion grooves for perpendicular boards. At the base 112 x 200 the cam assembly is specially designed for the 100 x 160mm European card with plug connectors. All housings are available in vented and non-vented versions.
€ 28,90
€ 28,90 Всеки (ex VAT)
1
€ 28,90
€ 28,90 Всеки (ex VAT)
1
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
Технически документи
Спецификации
Brand
BoplaBody Material
Polystyrene
External Length
200 mm
External Height
70 mm
External Width
112 mm
External Dimensions
200 x 112 x 70mm
IP Rating
IP40
Colour
Grey
Lid Colour
Grey
Series
Elegant
Number of Knockouts
7
Weight
278g
Страна на произход
Germany
Детайли за продукта
Desktop and wall housing
A series of elegant table and wall housings made of impact-resistant polystyrene. They are used for the installation of small appliances, and many other components. The housings are made up of two half shells; the upper part is light grey (similar to RAL 7035) and the lower part is agate grey (similar to RAL 7038). The screw connection is made from below with 4 screws. There are mounting bosses for self-tapping screws in the upper and lower parts for board mounting. There are also insertion grooves for perpendicular boards. At the base 112 x 200 the cam assembly is specially designed for the 100 x 160mm European card with plug connectors. All housings are available in vented and non-vented versions.