Beha-Amprobe SC-7000 Signal Clamp for AT-7000 Advanced Wire Tracer

Номер на артикул на RS: 909-4124Марка: Beha-Amprobe№ по каталога на производителя: SC-7000-EUR
brand-logo
Преглед на всички в Аксесоари за изпитване и измерване на мрежа

Технически документи

Спецификации

Brand

Beha-Amprobe

Accessory Type

Signal Clamp

For Use With

AT-7000 Advanced Wire Tracer

Model Number p

SC-7000

Страна на произход

China

Детайли за продукта

Beha-Amprobe SC-7000-EUR Signal Clamp

Beha-Amprobe SC-7000-EUR signal clamp is used with Beha-Amprobe AT-7000 advanced wire tracers when there is no access to bare conductors. The clamp induces a signal into either energised or de-energised circuits for wire tracing and load locating. The AT-7000-TE transmitter 'clamp' mode provides a boosted 6 kHz signal through the clamp to further improve accuracy and performance.

For inducing signal into wires without access to bare conductors
Jaw opening 5.08 cm (2 in)
Operating temperature range -17.77 °C to +49 °C (0 to 120 °F)
Operating humidity 95% RH max
Measurement Category CAT IV 600 V
Drop test 1 m (3.28 ft)
Protection rating IP52
Dimensions 20.83 x 8.13 x 4.27 cm (8.2 x 3.2 x 1.68 in)
Weight 0.294 kg (0.648 lb)

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

Beha-Amprobe SC-7000 Signal Clamp for AT-7000 Advanced Wire Tracer

1

Предлагат се на бройка по 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

Beha-Amprobe SC-7000 Signal Clamp for AT-7000 Advanced Wire Tracer
Информацията за складовите наличности временно не е налична.

1

Предлагат се на бройка по 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Технически документи

Спецификации

Brand

Beha-Amprobe

Accessory Type

Signal Clamp

For Use With

AT-7000 Advanced Wire Tracer

Model Number p

SC-7000

Страна на произход

China

Детайли за продукта

Beha-Amprobe SC-7000-EUR Signal Clamp

Beha-Amprobe SC-7000-EUR signal clamp is used with Beha-Amprobe AT-7000 advanced wire tracers when there is no access to bare conductors. The clamp induces a signal into either energised or de-energised circuits for wire tracing and load locating. The AT-7000-TE transmitter 'clamp' mode provides a boosted 6 kHz signal through the clamp to further improve accuracy and performance.

For inducing signal into wires without access to bare conductors
Jaw opening 5.08 cm (2 in)
Operating temperature range -17.77 °C to +49 °C (0 to 120 °F)
Operating humidity 95% RH max
Measurement Category CAT IV 600 V
Drop test 1 m (3.28 ft)
Protection rating IP52
Dimensions 20.83 x 8.13 x 4.27 cm (8.2 x 3.2 x 1.68 in)
Weight 0.294 kg (0.648 lb)