Assemtech Change Over Reed Switch

Номер на артикул на RS: 909-2834Марка: Assemtech№ по каталога на производителя: GC1917-Kit
brand-logo

Технически документи

Спецификации

Contact Configuration

Change Over

Contact Resistance

100mΩ

Contact Material

Rhodium

AT Value Range

40-60 / 60-80 / 80-100AT

Width

5.6 (Dia.)mm

Length

36mm

Dimensions

5.6 (Dia.) x 36mm

Страна на произход

Belgium

Детайли за продукта

Form A & C Reed Switch Kits

These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.

They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

Features

Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 10⁸ Operations
For suitable magnets, see stk. no 362-2401 typically

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

Assemtech Change Over Reed Switch

P.O.A.

Assemtech Change Over Reed Switch
Информацията за складовите наличности временно не е налична.

Технически документи

Спецификации

Contact Configuration

Change Over

Contact Resistance

100mΩ

Contact Material

Rhodium

AT Value Range

40-60 / 60-80 / 80-100AT

Width

5.6 (Dia.)mm

Length

36mm

Dimensions

5.6 (Dia.) x 36mm

Страна на произход

Belgium

Детайли за продукта

Form A & C Reed Switch Kits

These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.

They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

Features

Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 10⁸ Operations
For suitable magnets, see stk. no 362-2401 typically