Технически документи
Спецификации
Brand
Analog DevicesMounting Type
Surface Mount
Package Type
LFCSP WQ
Pin Count
40
Dimensions
6.1 x 6.1 x 0.75mm
Length
6.1mm
Width
6.1mm
Height
0.75mm
Maximum Operating Supply Voltage
3.7 V
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
2.4 V
Minimum Operating Temperature
-40 °C
Детайли за продукта
ADE7880, Polyphase Multifunction Energy Metering IC, Analog Devices
The ADE7880 from Analog Devices is a high accuracy, 3-phase electrical energy measurement IC with serial interfaces and three flexible pulse outputs. The device incorporates second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition this device has the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory.
Features
Highly accurate – supports IEC 62053-21, IEC 62053-22, IEC 62053-23, EN 50470-1, EN 50470-3, ANSI C12.20, and IEEE1459 standards
Supports IEC 61000-4-7 Class I and Class II accuracy specification
Compatible with 3-phase, 3 or 4-wire (delta or wye) and other 3-phase services
Supplies rms, active, reactive and apparent powers, power factor, THD, and harmonic distortion of all harmonics within 2.8 kHz pass band on all phases
Supplies rms and harmonic distortions of all harmonics within 2.8 kHz pass band on neutral current
Battery supply input for missing neutral operation
Reference: 1.2 V (drift 10 ppm/°C typical) with external overdrive capability
Less than 1% error in harmonic current and voltage rms, harmonic active and reactive powers over a dynamic range of 2000 to 1 at TA = 25°C
Less than 0.1% error in active and fundamental reactive energy over a dynamic range of 1000 to 1 at TA = 25°C
Less than 0.2% error in active and fundamental reactive energy over a dynamic range of 5000 to 1 at TA = 25°C
Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C
Typical applications
Energy metering systems
Power quality monitoring
Solar Inverters
Process monitoring
Protective devices
Energy/Power Measurement - Analog Devices
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 17,44
Всеки (ex VAT)
Стандарт
1
€ 17,44
Всеки (ex VAT)
Стандарт
1
Купете в насипно състояние
количество | Единична цена |
---|---|
1 - 9 | € 17,44 |
10 - 24 | € 16,02 |
25 - 49 | € 15,37 |
50 - 99 | € 14,97 |
100+ | € 12,88 |
Технически документи
Спецификации
Brand
Analog DevicesMounting Type
Surface Mount
Package Type
LFCSP WQ
Pin Count
40
Dimensions
6.1 x 6.1 x 0.75mm
Length
6.1mm
Width
6.1mm
Height
0.75mm
Maximum Operating Supply Voltage
3.7 V
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
2.4 V
Minimum Operating Temperature
-40 °C
Детайли за продукта
ADE7880, Polyphase Multifunction Energy Metering IC, Analog Devices
The ADE7880 from Analog Devices is a high accuracy, 3-phase electrical energy measurement IC with serial interfaces and three flexible pulse outputs. The device incorporates second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition this device has the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory.
Features
Highly accurate – supports IEC 62053-21, IEC 62053-22, IEC 62053-23, EN 50470-1, EN 50470-3, ANSI C12.20, and IEEE1459 standards
Supports IEC 61000-4-7 Class I and Class II accuracy specification
Compatible with 3-phase, 3 or 4-wire (delta or wye) and other 3-phase services
Supplies rms, active, reactive and apparent powers, power factor, THD, and harmonic distortion of all harmonics within 2.8 kHz pass band on all phases
Supplies rms and harmonic distortions of all harmonics within 2.8 kHz pass band on neutral current
Battery supply input for missing neutral operation
Reference: 1.2 V (drift 10 ppm/°C typical) with external overdrive capability
Less than 1% error in harmonic current and voltage rms, harmonic active and reactive powers over a dynamic range of 2000 to 1 at TA = 25°C
Less than 0.1% error in active and fundamental reactive energy over a dynamic range of 1000 to 1 at TA = 25°C
Less than 0.2% error in active and fundamental reactive energy over a dynamic range of 5000 to 1 at TA = 25°C
Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C
Typical applications
Energy metering systems
Power quality monitoring
Solar Inverters
Process monitoring
Protective devices