Altech CB243A Battery Charger For 24 V dc, Lead Acid, NiCd 35 A
Технически документи
Спецификации
Brand
AltechProduct Type
Battery Charger
Output Voltage
24 V dc
Maximum Charge Current
35A
Maximum Charging Time
15h
Compatible Battery Chemistry
Lead Acid, NiCd
Termination Type
Screw
Maximum Output Power
72W
Standards/Approvals
IEC 61709, EN/IEC 60529
Weight
1.55kg
Maximum Input Voltage
264V ac
Model Number
CB243A
Minimum Input Voltage
90V ac
Страна на произход
Italy
Детайли за продукта
Altech CB Series Battery Chargers
Altech CB series multi-stage battery charges are automatic and suited to the most advanced requirements of battery manufacturers. The CB series feature real-time auto diagnostics for monitoring battery faults, disconnections and charge status. Suited for use with open and sealed lead acid batteries, lead gel and NiCd batteries.
Single phase input
Output: Battery charging 12 V dc and 24 V dc (switch select)
Automatic diagnostic of battery status
Four charging levels: Boost, Absorption, Trickle, Recovery
Protected against short circuit, reversed polarity, over load
Signal output (contact free) for fault battery state
Protection degree IP20 - DIN rail mountable
Linear Low Noise SLA Chargers
Информацията за складовите наличности временно не е налична.
€ 213,57
€ 213,57 Всеки (ex VAT)
1
€ 213,57
€ 213,57 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
1
Технически документи
Спецификации
Brand
AltechProduct Type
Battery Charger
Output Voltage
24 V dc
Maximum Charge Current
35A
Maximum Charging Time
15h
Compatible Battery Chemistry
Lead Acid, NiCd
Termination Type
Screw
Maximum Output Power
72W
Standards/Approvals
IEC 61709, EN/IEC 60529
Weight
1.55kg
Maximum Input Voltage
264V ac
Model Number
CB243A
Minimum Input Voltage
90V ac
Страна на произход
Italy
Детайли за продукта
Altech CB Series Battery Chargers
Altech CB series multi-stage battery charges are automatic and suited to the most advanced requirements of battery manufacturers. The CB series feature real-time auto diagnostics for monitoring battery faults, disconnections and charge status. Suited for use with open and sealed lead acid batteries, lead gel and NiCd batteries.
Single phase input
Output: Battery charging 12 V dc and 24 V dc (switch select)
Automatic diagnostic of battery status
Four charging levels: Boost, Absorption, Trickle, Recovery
Protected against short circuit, reversed polarity, over load
Signal output (contact free) for fault battery state
Protection degree IP20 - DIN rail mountable
Linear Low Noise SLA Chargers