Allen Bradley MatGuard 440F Safety Mat/Edge Safety Relay, 24 → 230V ac/dc, Single Channel, 2 Safety Contacts
Технически документи
Спецификации
Brand
Allen BradleySupply Voltage
24 → 230V ac/dc
Number of Channels
1
Safety Contacts
2
Function
Safety Mat/Edge
Auxiliary Contacts
1
Reset Method
Automatic & Manual
Range
MatGuard
Series
440F
Width
130mm
Depth
75mm
Length
180mm
Страна на произход
Germany
Детайли за продукта
Rockwell Automation Safety Mat System MatGuard Control Unit
Complete your pressure sensitive MatGuard safety system and minimise risk injury to personnel in hazardous areas with the 440F-C4000P Matguard Control Unit. This device is designed to work within the MatGuard presence sensing system and monitor any number of mats which are connected together, forming a safeguarded zone up to a total area of 100m². The unit interfaces with the control circuitry of the machine and includes two safety relays for control redundancy.
The 440F Safety Mats offer whole body detection on the sensing surfaces. When the surface is clear the controller sends a signal to the control circuit of the machine. Conductive plates within the mat touch when the mat is stepped on and resistance in the circuit falls to zero. The controller then sends a shutdown signal to the machine, preventing risk of injury to operators within the dangerous area.
€ 1 068,21
€ 1 068,21 Всеки (ex VAT)
1
€ 1 068,21
€ 1 068,21 Всеки (ex VAT)
1
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
Технически документи
Спецификации
Brand
Allen BradleySupply Voltage
24 → 230V ac/dc
Number of Channels
1
Safety Contacts
2
Function
Safety Mat/Edge
Auxiliary Contacts
1
Reset Method
Automatic & Manual
Range
MatGuard
Series
440F
Width
130mm
Depth
75mm
Length
180mm
Страна на произход
Germany
Детайли за продукта
Rockwell Automation Safety Mat System MatGuard Control Unit
Complete your pressure sensitive MatGuard safety system and minimise risk injury to personnel in hazardous areas with the 440F-C4000P Matguard Control Unit. This device is designed to work within the MatGuard presence sensing system and monitor any number of mats which are connected together, forming a safeguarded zone up to a total area of 100m². The unit interfaces with the control circuitry of the machine and includes two safety relays for control redundancy.
The 440F Safety Mats offer whole body detection on the sensing surfaces. When the surface is clear the controller sends a signal to the control circuit of the machine. Conductive plates within the mat touch when the mat is stepped on and resistance in the circuit falls to zero. The controller then sends a shutdown signal to the machine, preventing risk of injury to operators within the dangerous area.