Вземете 7 % отстъпка за всички онлайн поръчки след регистрация с RS.

регистрирайте се сега

Aim-TTi TGR6000 RF Signal Generator, 10MHz min, 6GHz max

Номер на артикул на RS: 737-7183Марка: Aim-TTi№ по каталога на производителя: TGR6000
brand-logo

Технически документи

Спецификации

Brand

Aim-TTi

Model Number

TGR6000

Frequency Resolution

10Hz

Maximum Frequency Range Sinewave

6GHz

Minimum Frequency Range Sinewave

10MHz

Time Base Accuracy

<±1ppm

Output Impedance

50Ω

Interface Type

GPIB, LAN, RS232, USB

Страна на произход

United Kingdom

Детайли за продукта

Aim-TTi TGR6000 6GHz RF Signal Generator

The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications where modulation is not required. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used. Sophisticated sweep functions enable the frequency and/or amplitude to be swept over the full range of each in a single sweep.

Supplied with

Operating manual, driver software, power lead

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

€ 4 702,04

Всеки (ex VAT)

Aim-TTi TGR6000 RF Signal Generator, 10MHz min, 6GHz max

€ 4 702,04

Всеки (ex VAT)

Aim-TTi TGR6000 RF Signal Generator, 10MHz min, 6GHz max
Информацията за складовите наличности временно не е налична.

Технически документи

Спецификации

Brand

Aim-TTi

Model Number

TGR6000

Frequency Resolution

10Hz

Maximum Frequency Range Sinewave

6GHz

Minimum Frequency Range Sinewave

10MHz

Time Base Accuracy

<±1ppm

Output Impedance

50Ω

Interface Type

GPIB, LAN, RS232, USB

Страна на произход

United Kingdom

Детайли за продукта

Aim-TTi TGR6000 6GHz RF Signal Generator

The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications where modulation is not required. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used. Sophisticated sweep functions enable the frequency and/or amplitude to be swept over the full range of each in a single sweep.

Supplied with

Operating manual, driver software, power lead