Acim Jouanin Formable Coil Heater, 1.65m, 1 kW, 230 V ac
Технически документи
Спецификации
Brand
Acim JouaninPower Rating
1 kW
Supply Voltage
230 V ac
Length
1.65m
Width
3.7mm
Heating Element Form
Insulated Strip
Страна на произход
France
Детайли за продукта
Cold-formed heating resistors
Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.
Strip Heating Elements
Warning
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Approvals
UL Recognised; CSA Certified
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 360,47
€ 360,47 Всеки (ex VAT)
1
€ 360,47
€ 360,47 Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 360,47 |
| 5 - 9 | € 346,03 |
| 10+ | € 335,27 |
Технически документи
Спецификации
Brand
Acim JouaninPower Rating
1 kW
Supply Voltage
230 V ac
Length
1.65m
Width
3.7mm
Heating Element Form
Insulated Strip
Страна на произход
France
Детайли за продукта
Cold-formed heating resistors
Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.
Strip Heating Elements
Warning
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Approvals
UL Recognised; CSA Certified