ABB CM10 DIN Rail Process Controller 2 Input, 2 Output Analogue, Relay 264V ac On-Off
Технически документи
Спецификации
Brand
ABBProduct Type
Process Controller
Output Type
Analogue, Relay
Number of Inputs
2
Number of Outputs
2
Maximum Current
5A
Minimum Operating Temperature
0°C
Maximum Operating Temperature
55°C
Control Type
On-Off
Maximum Supply Voltage
264V ac
Digital Comms
Ethernet, RS485/Modbus
Diagnostics
Yes
Maximum Voltage
240V ac
Display Type
LCD, Multi Line, TFT
Length
141mm
Standards/Approvals
CE, NEMA 4X, IEC 61326, EN 61010-1, cULus
Width
50mm
IP Rating
IP66
Series
CM10
Mount Type
DIN Rail
Input Type
Digital
Panel Depth
121mm
Страна на произход
United Kingdom
Детайли за продукта
ControlMaster PID Controller CM10
The ControlMaster CM10 is a flexible PID process controller in a 1/8 DIN unit. Detailed process information is presented clearly on the CM10's full-colour TFT display and an intuitive operator interface simplifies configuration and operation. Scalable in both hardware and software functionality, a CM10 can be easily specified to meet the needs of your application requirements. Flexible control functionality including on/off, time proportioning, analogue PID, split output and autotune make the CM10 suitable for a wide range of process applications.
Fully configurable via the easy-to-navigate front panel menus or PC configuration software, the CM10 can be commissioned rapidly and then tuned via the advanced autotune functionality.
Features and Benefits
• Full-colour 5.5cm (2.2”) TFT display
• User-customisable, intuitive interface with clear text prompts for easy installation, commissioning and operation
• Scalable to match application requirements
• Comprehensive hardware and software options
• Flexible control functionality
• On/Off, time proportioning, analogue PID and split output
• IP66 and NEMA 4X environmental protection
Functionality:
The autotune capability in the CM10 provides automatic calculation of the PID values after initial setup and configuration is completed for rapid commissioning in whatever application.
8 Independent process alarms provide analogue signal monitoring to enable extensive process monitoring functionality. These alarms can be used to drive physical outputs and also have the ability to drive soft-wired functions within the controller itself.
Split output control configuration of the CM10 allows for controlling both heating and cooling of a single process if required.
I/O build:
• 2 Analogue inputs
• 1 Analogue O/P
• 1 Relay
Base Templates:
• Single loop with local setpoint
• Single loop with remote setpoint
Информацията за складовите наличности временно не е налична.
€ 463,27
€ 463,27 Всеки (ex VAT)
1
€ 463,27
€ 463,27 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
1
| количество | Единична цена |
|---|---|
| 1 - 4 | € 463,27 |
| 5 - 9 | € 440,12 |
| 10 - 24 | € 423,37 |
| 25 - 49 | € 412,23 |
| 50+ | € 401,66 |
Технически документи
Спецификации
Brand
ABBProduct Type
Process Controller
Output Type
Analogue, Relay
Number of Inputs
2
Number of Outputs
2
Maximum Current
5A
Minimum Operating Temperature
0°C
Maximum Operating Temperature
55°C
Control Type
On-Off
Maximum Supply Voltage
264V ac
Digital Comms
Ethernet, RS485/Modbus
Diagnostics
Yes
Maximum Voltage
240V ac
Display Type
LCD, Multi Line, TFT
Length
141mm
Standards/Approvals
CE, NEMA 4X, IEC 61326, EN 61010-1, cULus
Width
50mm
IP Rating
IP66
Series
CM10
Mount Type
DIN Rail
Input Type
Digital
Panel Depth
121mm
Страна на произход
United Kingdom
Детайли за продукта
ControlMaster PID Controller CM10
The ControlMaster CM10 is a flexible PID process controller in a 1/8 DIN unit. Detailed process information is presented clearly on the CM10's full-colour TFT display and an intuitive operator interface simplifies configuration and operation. Scalable in both hardware and software functionality, a CM10 can be easily specified to meet the needs of your application requirements. Flexible control functionality including on/off, time proportioning, analogue PID, split output and autotune make the CM10 suitable for a wide range of process applications.
Fully configurable via the easy-to-navigate front panel menus or PC configuration software, the CM10 can be commissioned rapidly and then tuned via the advanced autotune functionality.
Features and Benefits
• Full-colour 5.5cm (2.2”) TFT display
• User-customisable, intuitive interface with clear text prompts for easy installation, commissioning and operation
• Scalable to match application requirements
• Comprehensive hardware and software options
• Flexible control functionality
• On/Off, time proportioning, analogue PID and split output
• IP66 and NEMA 4X environmental protection
Functionality:
The autotune capability in the CM10 provides automatic calculation of the PID values after initial setup and configuration is completed for rapid commissioning in whatever application.
8 Independent process alarms provide analogue signal monitoring to enable extensive process monitoring functionality. These alarms can be used to drive physical outputs and also have the ability to drive soft-wired functions within the controller itself.
Split output control configuration of the CM10 allows for controlling both heating and cooling of a single process if required.
I/O build:
• 2 Analogue inputs
• 1 Analogue O/P
• 1 Relay
Base Templates:
• Single loop with local setpoint
• Single loop with remote setpoint