ABB Modular DIN Rail Components EPD24 Electronic Circuit Breaker 10 A 24 V, 1 channels, DIN Rail current limitation 1.8
Технически документи
Спецификации
Brand
ABBProduct Type
Electronic Circuit Breaker
Range
Modular DIN Rail Components
Series
EPD24
Number of Channels
1
Current Rating
10 A
Voltage
24 V
Mount Type
DIN Rail
Tripping Characteristics
current limitation 1.8 x IN (0.5-6A), 1.5 x IN (8-10A), trip time 100 ms...3 s at Iload > 1.8 x IN, Electronic Release, 1.1 x IN (1.05 to 1.35 x IN), 1.3 x IN (12A)
Length
83mm
Terminal Type
Screw
Width
12.5 mm
Depth
83mm
Standards/Approvals
RoHS, UL, CSA
Страна на произход
Germany
Детайли за продукта
EPD24 Series Electronic Protection Device
ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.
Selective load protection
Reliable overload disconnection with 1.1 x Input plus
Manual ON/OFF button
Clear status and failure indication through LED and integrated auxiliary contact
Integral fail-safe element adjusted to current rating
Width per unit only 12.5 mm
DIN rail mounting
Easy wiring through busbar LINE+ and 0 V as well as signal bars
Информацията за складовите наличности временно не е налична.
€ 116,38
€ 116,38 Всеки (ex VAT)
1
€ 116,38
€ 116,38 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
1
Технически документи
Спецификации
Brand
ABBProduct Type
Electronic Circuit Breaker
Range
Modular DIN Rail Components
Series
EPD24
Number of Channels
1
Current Rating
10 A
Voltage
24 V
Mount Type
DIN Rail
Tripping Characteristics
current limitation 1.8 x IN (0.5-6A), 1.5 x IN (8-10A), trip time 100 ms...3 s at Iload > 1.8 x IN, Electronic Release, 1.1 x IN (1.05 to 1.35 x IN), 1.3 x IN (12A)
Length
83mm
Terminal Type
Screw
Width
12.5 mm
Depth
83mm
Standards/Approvals
RoHS, UL, CSA
Страна на произход
Germany
Детайли за продукта
EPD24 Series Electronic Protection Device
ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.
Selective load protection
Reliable overload disconnection with 1.1 x Input plus
Manual ON/OFF button
Clear status and failure indication through LED and integrated auxiliary contact
Integral fail-safe element adjusted to current rating
Width per unit only 12.5 mm
DIN rail mounting
Easy wiring through busbar LINE+ and 0 V as well as signal bars